Some 2007 Mustang vehicles equipped with a 4.0L engine may exhibit the spoilers in contact with the deck lid causing paint damage.
Follow the Service Procedure to add Urethane tape between the spoiler and the deck lid.
Cut a piece of Urethane Tape (Hard Foam Part Number 164-R4902) 5/8" X 2" from the Rotunda Squeak And Rattle Kit (Part Number 164-R4900).
Remove the backing on the Urethane tape and slide in-between the spoiler and the deck lid on both left and right sides of the deck lid/spoiler. Use a thin, flathead screwdriver or knife to aid in installation. (Figures 1, 2, and 3)
YOU MAY HAVE TO APPLY A LIGHT AMOUNT OF PRESSURE TO THE DECK LID TO CREATE A SLIGHTLY LARGER GAP TO SLIDE IN THE TAPE.
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
2007 Mustang 4.0L: Install Urethane Tape Between The Spoiler And The Deck Lid