This article supersedes TSB 06-22-16 to update the Parts List.
Some 2005-2007 Mustang vehicles built before 10/11/2006 and equipped with a convertible top could develop wear or a hole near the 4th bow and/or number 1 bow area. This is caused by the number 1 and number 4 bow wearing or pinching through the vinyl or cloth top.
Follow the Service Procedure steps to correct the condition.
Install a new convertible top cover.
Install two (2) tether straps.
Add tape to the number 1 bow panel following the instruction sheet provided in the Convertible Top Kit.
Convertible Top Kit - (Black Vinyl)
Convertible Top Kit - (Camel Vinyl)
Convertible Top Kit - (Black Cloth)
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
2005-2007 Mustang Convertible: Replace Convertible Top Cover Includes Time To Install Tether Straps, And To Remove And Install Top Assembly (Do Not Use With 52700A, 53000A)