midnitestang

Is there any substantial gain from a port and polish on a mustang? Got the tools to do it, just wonderin if anyone else has done this to their stang and if it was worth the trouble.

__________________
98 GT
86 GT Hatchback

Obsol3te

what exactly is it?</P>


do you just make the insides shiney?</P>

__________________
R331 Stroker @ 8.5:1

313RWHP 339RWTQ (N/A)
423RWHP 518RWTQ (N20)

BCisme

for your 98 GT, it would be pointless as the intake ports are so small pee wee herman couldn't fit himself in one of them. your best bet is to pick up a set of PI heads cams and intake, and do a port and polish job and install. working with the stock 96-98 heads is pointless, as they also have an insufficient valvetrain. <edited><editID>BCisme</editID><editDate>38031.9273032407</editDate></edited>

__________________
Grabber Orange 2008 Mustang GT
Green 1998 Mustang GT Twin Turbo

midnitestang

Thanks. That'll save me alot of time.

__________________
98 GT
86 GT Hatchback

nomocobra

be carefull when porting...you dont want to get rid of to much, if your NA

hotrodman

bowl blend them good,, gasket match them also,,pay close attention to the exhast side,,thats were most of the work needs to be done,

jeep45238

Unshroud your valves.....the gains that can be had from that alone are rediculous.

vfast

unshrounding the valves and bowl blending should be left up to a exp. person....it will have a big affect on hp if done right if not it will run worst (slower)

hotrodman

MEAUXS RACING HEAD SERVICE..IN LA.JUST BE A YEAR BEFORE YOU GET THEM BACK,,BUT HES GOOD,,,REAL GOOD................JUST BOOKED UP..

midnitestang

Can I just send them up there to be worked?

__________________
98 GT
86 GT Hatchback