View Full Version : gettin a 67


67fastback4444
06-19-2003, 06:21 PM
hey im a newb and ive been wanting a 67 fastbask, which i am going to get one, i was wondering if ne one else has one?</P>


</P>

WhiteHawk
06-19-2003, 06:31 PM
The only reason why I don't get one right now is because I don't have a garage to work in......otherwise I would be in there, tearing that thing apart and rebuilding it big time. </P>

67fastback4444
06-19-2003, 06:42 PM
i want to put a boss engine in it if i can find 1.</P>

67fastback4444
06-19-2003, 06:51 PM
u know like a 390ci or a 428ci, that will add some power to it if it fits

WhiteHawk
06-19-2003, 06:53 PM
351W with some nice heads and a demon carb - take a look at </P>


http://www.fordcobraengines.com/351_425Carb.htm (http://www.fordcobraengines.com/351_425Carb.htm target=)</P>


and that's without the Demon carb which I think would do better on that engine. -- that's a REAL crate engine, out of the box and into your car.....it's totally complete!!! not bad for $6595.00 - they can build a better one, but if it's for the street it should be plenty. 425HP maybe a little more with the Demon carb. Runs nice on pump gas, Idles good..... you can't go wrong. make sure you car is lite with a good suspension and then go munch on whatever you want.</P>

67fastback4444
06-19-2003, 06:56 PM
yea not bad but thats more than half of what the car is gonna cost

67fastback4444
06-19-2003, 06:58 PM
so is that a company that does that and u can order it from them or what?

WhiteHawk
06-19-2003, 07:02 PM
check out their whole website...they have alot more diff. types of packages to chose from... --- from like 3K complete packages to imcomplete for less and stuff that you can do on your own.... unless you are a mechanic, have a place to work on it and do alot of the work yourself you will have to spend some bucks.... if you know ppl,have a place, do the job urself and go thru junkyards then you can probably make a decent HP making engine for a probably under 1.5K..... but you have to be willing to do ALOT yourself. -- this car hobby ain't cheap if you are not willing to do alot.</P>

WhiteHawk
06-19-2003, 07:04 PM
It's a reliabel Engine shop....good with the BBB, excellent history, no suits of any sort..... you call, you talk, figure it all out then they build it for you.... and they test it for you. they make it REAL easy.</P>

67fastback4444
06-19-2003, 07:05 PM
ok thanks, if i put that big of an engine in it what else would i have to it so that it would run right?

WhiteHawk
06-19-2003, 07:12 PM
mate it with a nice tranny (t-56 if you can) t5 will do(but make sure its the 1990 and up version &lt;z series&gt;) , shaft(aluminium if possible to keep the weight down), rear(8.8" ), and suspension....oh, and don't forget the brakes, cause after all that your going to need powerful stuff to stop. ---- </P>

67fastback4444
06-19-2003, 07:14 PM
ok thanks again and another question is u couldnt put a fuel injected engine into a 67 could you?</P>


is that engine u showed me ready to drop in? and what are some other good engines, more hp..</P>

67fastback4444
06-19-2003, 07:27 PM
yea more hp but still can be driven everyday on pump gas

WhiteHawk
06-19-2003, 07:32 PM
The one I showed you was the carb version, yes they have the fuel injected version also, just a little more $$. -- and yes that engine is ready to be dropped in. </P>


go to www.enginefactory.com (http://www.enginefactory.com) and visit the ford section, they have 302s to 460s. on the 302s and 351W or Cleavelands you can get either carb or EFI on the 302s and 351Ws.... Cleavelands and 460s only carb version. </P>


how much money do you want to spend with the cost of the car included???</P>

67fastback4444
06-19-2003, 07:35 PM
what do u mean? im willing to pay 10k for the car....

WhiteHawk
06-19-2003, 07:47 PM
do you plan to spend 10 k total?? do you plan to spend 10k on the car and then spend some mula on the mods? if so, how much on the mods.....then you can decide what to put in there. -- what condition of a car do you want? inside, outside, -- do you want a project car that you can work on and develop a relationships with or just a turnkey car and if something in between then towards which side? </P>


have you decided if it's going to be a racer only, or a street/strip or street/road or just a daily driver with some 'tude? </P>


After you decide that, then you can know what to spend, cause you don't want a fast car you can't stop (cause it aint got brakes), or you don't want a nice paint job if the inside looks like crap, or get a great engine but not any $$ leftover to mate it to a nice tranny.... that kinda stuff.</P>


</P>

67fastback4444
06-19-2003, 07:57 PM
well 10 k on the car and all my extra cash on the car, not sure of how much thats gonna be. its gonna be a daily driver and a racer.

67fastback4444
06-19-2003, 07:59 PM
and i want the car to be in a nice condition at least on teh outside with no rust and be able to run with out worrying about it quitrting on me. it doesnt have to be ne thing fancy.

WhiteHawk
06-19-2003, 08:19 PM
There are 2 on EBay right now, under 10K in nice condition. One in particular that is around 7900 but the reserve is not yet met...I bet 8500 would get that one. -- needs little work and you can take the rest of the cash and make it nice. probably all for under 10 or 11K.</P>


good luck.</P>

67fastback4444
06-19-2003, 08:21 PM
thanks</P>


i really dont want to buy it on ebay, to much shipping and trouble.</P>

WhiteHawk
06-19-2003, 08:24 PM
you might have a hard time finding one then. -- depending on where you live..</P>


ps - there is a coupe in there for 5600 that is SWEEEEEEET!!!!</P><edited><editID>WhiteHawk</editID><editDate>37791.7692476852</editDate></edited>

67fastback4444
06-19-2003, 08:26 PM
whats the link?

WhiteHawk
06-19-2003, 08:28 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;item=2419715835&amp;indexURL=9# ebayphotohosting</P>


thats for the coupe</P>

67fastback4444
06-19-2003, 08:30 PM
whoa very sweet but im lookin for a fastback

WhiteHawk
06-19-2003, 08:35 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;item=2419610094&amp;category=62 36</P>


this is for the one I would buy..... </P>

WhiteHawk
06-19-2003, 08:37 PM
this is also nice, but i think just a bit pricey.</P>


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;item=2419952200&amp;category=62 36</P>

67fastback4444
06-19-2003, 08:41 PM
really cuz i was thinking about buying a reagular fastback 289ci 4v v8 for 10k

67fastback4444
06-19-2003, 08:41 PM
intertior is basically perfect outside is almost perfect