I have a 96 GT and i want to install xeon lights can i just buy the xeon light bulbs and put them in or do i have to get a whole kit and change the inside of the lights? Thanks
Hey Ok but i was talking to my freind and he said that you have would have to buy somthing like this http://www.xtralights.com/hidkit_popup/HIDkit_popup.htm or can i just go get bulbs anf switch them with the halogen ones Thanks
Hey Ok but i was talking to my freind and he said that you have would have to buy somthing like this http://www.xtralights.com/hidkit_popup/HIDkit_popup.htm or can i just go get bulbs anf switch them with the halogen ones Thanks
That is a true HID conversion kit. Go with something like that or do nothing at all. So-called "Xenon Look Bulbs" are only lookalikes that can draw up to 100 watts.....not good for your stock headlight wiring harnesses, connectors, or switch.
I have run high wattage bulbs in several vehicles, but I use a heavy duty harness run directly off the battery. I prefer the harness regardless, especially in older vehicles...
The lights with the high wattage and HD harness is much whiter than stock. Not as bright as HID, but for the money much better than stock...
Right, a heavy duty harness run directly from the battery makes high-wattage bulbs a usable option. Better quality HID conversion kits use the same approach. They power the ballasts directly from the battery via relays; the stock headlight switch and wiring is only used to open and close two relays in the kit harness
I had this same setup in my '84 300ZX. I was only getting 10.5v to the headlights while the car was running. I just used the HD harness with the stock bulbs, and it was like night and day, literally (2 or 3 volts makes a huge difference in headlight output). I couldn't drive the car at night before. I then upgraded the housings and added high wattage bulbs, and it was even better... As mentioned above, don't run the high wattage bulbs on stock wiring, but if you want to upgrade I recommend using the HD harness and high watt bulb verses Silverstars... or HID... which I really want for the Stang...
Printable Version
Xeon Light - 
1994 Mustang GT , 5spd, GT40 intake,Headers,CAI,U/D pulleys,Magnaflow H-Pipe,Magnaflow exhaust,Subframe connectors,3.73's, Pro 5.0, BFG Radials, ZEX Wet kit. 
