I have LED lights and a toggle switch, I wired the LED strips together and I was gonna just hook it up to the accesories fuse, which would be on everytime the key is on, now I am looking how to install a toggle switch, the directions that came with the toggle switch are the worst directions ever made, I still figured it out how im gonna do it, the only problem is the extra wire, the LED strips would be attached to the toggle switch, now from there, the toggle switch came with no effin wires or instructions how to hook it up to anything, the back is 2 prongs, very very similiar to the type you find to plug things into outlets, just a lil furter apart, would I just wrap the wires around the holes in the prong??????

you need to power the switch from the fuse box on one prong (use a spade connector for both connections)
and run a wire from the other prong to your led's or whatt ever your going to power

well there a red positive and black ground negative from the LED strips, so I assume id have the positive red attached to the toggle switch but to the positive, then attach the fuse wire to the positive also, then attach the ground to the negative?