2003 mustang gt with mach

paniro187 · 12-30-2005, 07:57 AM

I'm happy with my mach 1000 sounds sytem but I want to replace the head unit with a doublen din radio. what's a pretty decent radio i can buy that will tie into the mach 1000 sounds sytem good. mind, i want a double din radio cause i really hate kits cause after a couple years they look like ****. a double din would fit in there perfect. also I'm sure since that since whatever radio i get will be a higher wattage then that would help the sound sytem a little huh??

pj1010 · 12-30-2005, 08:38 PM

None...you migh as well replace the whole setup. There is no harness for 2003 Mach.

Sinister Audio · 12-30-2005, 09:24 PM

i have never had a problem with kits looking bad after a couple years you just have to use a high quality kit and not a walmart one. and double dins are over priced for what you get out of them.

paniro187 · 12-30-2005, 09:54 PM

i like double dins mainly because they look like the car came with that radio. kits just look to fake. so uhhmm will a kenwood double din radio tie into the system .

GTnAZ · 01-04-2006, 04:32 PM

it probably will, you will need to talk to you local stereo shop and tell them what you bought so they can give you the right type of wiring harness then all you have to do is sodder it all together and plug it all in...
GL and let us know if you need anything else!

hookandpull · 01-05-2006, 01:47 AM

NO MATTER WHAT HEAD UNIT YOU BUY AIT DOESNT MATTER . WHAT MATTERS IS THE HARNESS AND THAT IS CAR SPECIFIC NOT KIT SPECIFIC YOU CAN GET A HARNESS TO BYPASS THE AMPS BUT WHAT YOU MIGHT HAVE TO DO IS RUN SPEAKER WIRE . BUT AS FAR AS THE AS THE HARNESS GOES THE HEAD UNIT HARNESS CRIMPS DIRECTLY INTO THE KIT HARNESS COLOR FOR COLOR NO MATTER WHAT YOU BUY ... JUST DONT CUT ANY WIRES OR YOU COULD GET BEST BUY TO INSTALL IT FOR 55 DOLLARS AND NOT WORRY ABOUT IT.

pj1010 · 01-05-2006, 02:48 PM

Do not listen to that hookandpull guy. THERE IS NO HARNESS FOR 2003 MACH STEREOS. HOW MANY PEOPLE HAVE TO ASK THIS DAMN QUESTION?

hookandpull · 01-05-2006, 10:11 PM

hey pj where did i say there was a harness for the mach pull the wad out between your cheeks and stop tryin to bust every bodies balls . we are all just trying to help each other out.

pj1010 · 01-05-2006, 10:13 PM

I'm not busting anyone's balls. I just don't want to see anyone who doesn't know any better waster money/time/equipment because someone on a forum gave them a bad bit of info.

hookandpull · 01-05-2006, 10:29 PM

ok mister you wont fry anything just go ahead and do it