Need some help please! I have a '97 mustang. I have recently installed an after market radio and my door and back speakers are not working right. I have sound but no bass at all. The speakers are also after market. I was told that in order for them to work properly I would have to re-wire speakers and by pass the factory amps, and they wanted alot of money for that. Any suggestions in order to fix problem would be greatly appreciated.
< Message edited by Tristan -- 12/27/2005 9:24:29 PM >
Does your aftermarket radio have front and rear pre-outs? If not, it makes it a little sketchy but we can still help you out. If you have the pre-outs you will need to go to your/a dealer and ask for this. If you don't go to Crutchfield.com and put in your vehicle 97 mustang w/ mach system, then go to the adaptor section and you'll see the what I call "gain box". and thats what you will need if you got a lower end deck that doesn't have pre-outs.
actually people say you gotta rewire this and that thats BS...i am the only 1 so far as i know that found this out.. you know how you take the factory tape and cd out?..well inback of the factory CD on the floor there is a amp..there is a clip going to it..go to pep boys and get the ford premium wire set..use the clip that says power and also there is a set up in that package that has a clip on both ends... 1 end fits into the clip you pull out of that factory amp.. snip the wires, hook it to your aftermarket deck, and there you go.it will work :-) throw the other little square clip away
Printable Version
(HELP)mach 460 sound system - 
RE: (HELP)mach 460 sound system - 
