RE: Super Six Motorsports
They make excellent parts, but they are a little high, but you can do all of these mods yourself, minus the cam which you will have to buy separately, just take your car to a shop and they can port and polish your intake and your heads, you will need to get a throttle body that matches your new ported intake size, I have a 50mm intake and a 56mm tb, so my intake needs to be ported to 56mm, and yes this mod is a great idea for forced induction mods, it will allow your engine to perform at its maximum and will allow your engine to breath better, and will eliminate some engine strain from the extra hp. You may need to get larger fuel injectors to match the new amount of air entering the engine, because your 19lb fuel injectors may be too small, you can get your air to fuel ratio reset, but you will not be performing as well as you would with 24 orr 30Lb.
|
