Supercharging my 1968 mustang
 

Hi everyone I am new to this site and I was wondering if anyone has supercharged their 289 small block? I am thinking of putting a NOVI 1200 on my 289 in my mustang. I am wondering how it worked for them and what type of numbers they got from it? Any help would be nice!! Thanks for your time! -John

Supercharging my 1968 mustang
 

If you got em burnem!!!

Supercharging my 1968 mustang
 

Not sure what kind of power it puts out, but I know there is a similar setup that the owner of my shop has. I'll try and remember to ask him about it tomorrow. His is a '65 convertible though (not that it makes a diff).

Supercharging my 1968 mustang
 

AJis Dope</P>


Thanks for your reply!! Can you ask him what superhcarger he used? If he has had any problems with it and how it works also? Thanks for your time!! -John</P>

Supercharging my 1968 mustang
 

Sure no problem. I'll be seeing him tomorrow, since I didn't go in today. I'll let you know what I find out. <IMG src=smileys/smiley1.gif border="0">

Supercharging my 1968 mustang
 

AJisDope</P>


</P>


I was just wondering if you talked to your boss about the supercharger? I had not heard from you so I was just wondering? No rush at all!! Thanks for your time!! -John</P>

Supercharging my 1968 mustang
 

Yeah sorry buddy. I have not had a chance to talk with him yet. I am going there tomorrow so I will leave myself a note to remember. :-p <edited><editID>AjIsDope</editID><editDate>38016.820787037</editDate></edited>

Supercharging my 1968 mustang
 

Paxton makes a nice unit for the small block fords with a 4bbl carb

Supercharging my 1968 mustang
 

</P>


Now that I look at this, I'm pretty sure this is the same setup he has.</P>


http://www.paxtonauto.com/catalog/systems.asp?Action=GetPart&amp;Part=1001839</P>


http://www.paxtonauto.com/images/sbford.gif border=</P>

Supercharging my 1968 mustang
 

what is the compression on your 289? have you done a leak down test or evan a regular compression test? When boosting your going to want to make sure that youre compression numbers are about withi 5% of eachother accross the board. Is it a fresh rebuild?</P>


</P>


</P>


Rob</P>