5.0 swap to a 96 6 cylinder (Full Version)

Mustang Forum >> Ford Mustang Tech >> 5.0 Mustang

5.0 swap to a 96 6 cylinder

  

92notch50Liter -> 5.0 swap to a 96 6 cylinder (3/5/2003 5:20:33 PM)

Ok im thinking about buying a 96 v-6 mustang and dropping a 5.0 in it. Will it fit right in? Also if it is a standard will that tranny work with a v-8? Also what are the bad sides of doing this, let me know what you think!

  
spike306 -> 5.0 swap to a 96 6 cylinder (3/5/2003 6:34:57 PM)

a 5.0 should fit in it cause they put them in the 95' whitch is the same body. however, you will have to mod a few things inside the engine compartment. (minor) other than that, slap a t-5, or a tremmic on that badass

noslow50 -> 5.0 swap to a 96 6 cylinder (3/5/2003 7:13:00 PM)

what he said...what kind of 5.0 stock of modded.... if u use a modded one than use a fox motor that way u can use the comp from a fox... they r supposed to have a more aggressive fuel curve in them... good luck

92notch50Liter -> 5.0 swap to a 96 6 cylinder (3/5/2003 7:29:42 PM)

Okay thanks but the 94,95, came with a 5.0 so i dont think that the engine would fit in because the throttle body and the intake manifold is diff, and it wont clear the hood. Let me know. I was going to but a new 5.0 with port and polished heads and new cams basically a perfromance engine would that qualify as a fox engine?

lloydchristmas -> 5.0 swap to a 96 6 cylinder (3/5/2003 7:49:23 PM)

you can get the adapter you need to make the throttle body fit from (i think it's) BBK

noslow50 -> 5.0 swap to a 96 6 cylinder (3/5/2003 10:34:41 PM)

the 5.0 that came outta the 94 95 will slip right into a 96... same car jsut come with diff motor...what i mean wheni say fox motor is get a 5.0 out of a 89 - 93 stang... there r slight differences than that 5.0 outta a 94 95.... for one the intake doesn't have that stupid elbow.... basically used to clear the alternator...hiope this helps..

mustang13 -> 5.0 swap to a 96 6 cylinder (3/9/2003 8:24:02 PM)

noslow50, are you sure that there are no other differences between the 95 mustang gt and a 95 mustang with a v6 besides the motor because i am looking to do the same thing as 90notch50liter

mustang13 -> 5.0 swap to a 96 6 cylinder (3/9/2003 8:41:57 PM)

nevermind the question noslow50 you already answered me, thanks again

AlabamaCobra -> RE: 5.0 swap to a 96 6 cylinder (2/18/2007 9:30:06 PM)

haha oldest post in 5.0 forums!

primetime5.0 -> RE: 5.0 swap to a 96 6 cylinder (2/18/2007 9:39:39 PM)

and why did you bring it back?

AlabamaCobra -> RE: 5.0 swap to a 96 6 cylinder (2/18/2007 9:41:42 PM)

i dono i just thought it was cool, why not? :P

LTnone -> RE: 5.0 swap to a 96 6 cylinder (2/18/2007 9:43:17 PM)

...wtf

Jasperstang308 -> RE: 5.0 swap to a 96 6 cylinder (2/18/2007 10:48:23 PM)

quote:

ORIGINAL: 92notch50Liter

Okay thanks but the 94,95, came with a 5.0 so i dont think that the engine would fit in because the throttle body and the intake manifold is diff, and it wont clear the hood. Let me know. I was going to but a new 5.0 with port and polished heads and new cams basically a perfromance engine would that qualify as a fox engine?



i know its old but yes it would clear the stock hood and i think u would have to swap in a 50 k-member also

bds95stang -> RE: 5.0 swap to a 96 6 cylinder (2/19/2007 1:54:53 AM)

i am currently doing the swap. it is a little more involved than people realize. what kind of part do you already have to work with? obviously you need more than just the motor. i am about half way through my swap and i am waiting on parts to complete. but i took a different route, i am going with a carb  so i do not have to deal with the computer and harness bullsh*t. i weighed my options and decided that was the best way to go for me. PM me if you have any questions that i could help with.

Jasperstang308 -> RE: 5.0 swap to a 96 6 cylinder (2/19/2007 2:19:51 AM)

they probably won't respond since this thread is 4yrs old

Idrum88 -> RE: 5.0 swap to a 96 6 cylinder (8/15/2007 9:40:26 PM)

LOL

Shelty -> RE: 5.0 swap to a 96 6 cylinder (8/15/2007 9:44:05 PM)

yeah, the OP hasnt made a post since '03...... he's long gone...

onetrickpony -> RE: 5.0 swap to a 96 6 cylinder (8/15/2007 10:48:34 PM)

quote:

ORIGINAL: AlabamaCobra

i dono i just thought it was cool, why not? :P

Some people have nothing but time on their hands.

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.