The Ford T-Lok is perfectly fine for the street. The average V6 owner isn't going to be doing burnouts on a regular basis (especially those with automatics) or running 250+ horsepower, and the 7.5" T-Lok will hold up just fine.
I have a mac CAI and shorty headers, true duels, 25% underdrive pulley, and a custom tune on 93 octane gas. I think I'm prolly sitting at about 215-220 hp. Right now I can get 1 wheel burnouts pretty easily (especially with the colder weather). I'm just looking for some better traction and a quicker take off. I am not planning to add any major power adders like SC or TC (this is my daily driver). so I think the ford T-Lok should be ok for me. Thanks for the help btw guys.
wats the top speed with 4:10s and at wat rpm? i think i seen on this post that w/ a tuner u can take the limiter off, if so then wat would be the top speed w/ and w/out gears?
_____________________________
Every1 makes fun of people who drive V6 mustangs, but havin us around jus makes people with a GT feel cool!! If we all had a V8 then owning 1 wouldnt mean anything!!
I don't know what the top speed will be with 4.10s, but right now I can bury the needle past 120 mph if I have a good, long, open stretch. At that speed the rpms are around 4k with stock gears.
< Message edited by 2KV6Stang -- 2/9/2007 4:01:14 PM >
Avoid buying your gears from National Drivetrain. Their gears don't fit in our stangs and it cost me $100 for shipping and my stang hanging in the lift for 5 days because their MotiveGear3.73 dont fit! Refund is a pain in the a## charging me $100 bucks for shipping as if it's my fault why I bought my gears through them. BADDD customer service so beware!
Posts: 2968
Joined: 12/15/2006 From: Lafayette/Gulf of Mexico, LA Status: offline
How did the gears not fit? A 7.5 is a 7.5 there is no variation, unles they sent/you ordered 8.8's. I'm not doubting you or them, I just want to make sure the facts are straight before people read this. I've had gears from them with no problems whatsoever.
My mechanic thinks its a manufacturing defect because the product I ordered online is for the 7.5 3.73 gears. My mechanic even talked to the customer rep on the phone.
Printable Version
RE: The One And Only Ring And Pinion Gears And Possi Tr... - 
