scheetz83

HI all

I am looking in to putting a roush front bumper on my car. But it being a v6 the grille (in theory) wont fit because the roush mustangs are GT's. so I want to put a GT grill in .

Here is my question.. on ebay these guy are selling a Modified GT grille kit that have a wire harness already built so you can use a gt switch. Can any one tell me how to create this wire harness?

it looks like I can buy the grill and lights off ebay for around $110. I think I should be able to do the job for around $200

__________________

rygenstormlocke

KC, clevparts@aol.com can get you the wiring, switch you need. Here is more contact info for him:

Kevin Casey
Parts Manager
Clevenger Ford Lincoln Mercury
05stangkc

i got my parts from him when I did the conversion.

__________________

Best 1/4: 10.97@122.09, 1.56 60ft w/4.0 V6
Best 1/4: 11.67@115.45, 1.64 60ft w/5.4 3V
Best 1/8: 7.401@92.77, 1.65 60ft w/5.4 3V
www.rygen.net/stang

mustanglover4040

I found a gt grill from westcoastperformanceparts.com. The price was high but the results are amazing. First of all the gt grill is about an inch higher than the v6 grill. So a little patience and time you can make it fit. The gt grill I got from west coast was about a half and hour to install . Everything included. Lights, harness, gt switch.

scheetz83

4040 I cant use that kit because I am sticking a front fascia on that is made for the GT grille I need to stick a stock UNmodified GT grille in my car to use this front fascia.

Is the kit you bought dose it utilize a GT switch? I want to be able to use a GT switch but I need to know how to do the wiring

I see you are new to the forum. GOod to have you in the heard

__________________