RE: 1/4?

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

RE: 1/4?

Printable Version

Mustang Forum >> Speed Zone >> Street/Strip >> RE: 1/4?

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: 1/4? - 9/29/2005 5:17:22 PM

redass02gt

Posts: 7041
Joined: 4/21/2005
Status: offline

bullit is 265

http://www.edmunds.com/used/2001/ford/mustang/100001046/specs.html?tid=edmunds.u.prices.leftsidenav..6.Ford*

_____________________________

Pitchforks and torches are the answers to all of our nation's problems. KOBE4MVP

(in reply to MikeHawke)

Post #: 21

RE: 1/4? - 9/30/2005 1:40:19 AM

Dave2000GT

Posts: 433
Joined: 6/6/2005
Status: offline

quote:

ORIGINAL: 97vette

I had a 1987 GT and the mechanic told me that the 5.0HO was 216hp. I was also told that the 4.6 was 265hp in the GT.

quote:

ORIGINAL: Dave2000GT

quote:

ORIGINAL: 97vette

Should do better than that. A 5.0 will run about a 14.9 to 15.2. Your 4.6 has quite a bit more power than the 5.0.

Since when do early 4.6's have more power than a 5.0 ?!?! LOL

They have MAYBE the same peak power, but less torque and way less low end.

Regardless, the car in question here should run in the high 14's with the gears and H pipe.

a) The 4.6 being referred to is the early non-PI 4.6 ('96-98'), rated at 215-225 HP

b) The 5.0 is rated at a conservative 225 HP, but also has a much better power band than the 4.6

Simply put... same car everything except 5.0 vs non-PI 4.6 the 5.0 wins 10 times of out 10.

(in reply to 97vette)

Post #: 22

RE: 1/4? - 10/1/2005 9:23:00 PM

ROB 98GT

Posts: 449
Joined: 6/18/2005
From: edmonton, alberta
Status: offline

i went to the track last night and the best i did was 14.8 in my auto. before i got my exhaust done, i usually ran around 15.1 ish. i hope this helps.

_____________________________

98 Mustang Gt - magnaflow catback, upr catted x-pipe, march u/d pullies, k&n fipk, frpp 9mm wires, diablo tune, frpp 4.10's, 3000 stall, trans-go shift kit, h&r sport

(in reply to 757GT)

Post #: 23

RE: 1/4? - 10/4/2005 12:45:50 AM

SXGT

Posts: 2254
Joined: 4/3/2004
From: Louisville, Ky
Status: offline

i run 9s in my AUTO at the 1/8th mile track with just mufflers, idk what that converts to as 1/4 tho

_____________________________

Don''''t be too proud of this technological terror you''''ve constructed. The ability to destroy a planet is insignificant next to the power of Big Oil.

(in reply to ROB 98GT)

Post #: 24

RE: 1/4? - 10/4/2005 3:11:19 PM

MikeHawke