07-29-2005, 12:24 AM
#1
New Member
Join Date: Apr 2004
Location:
Posts: 153
ANOTHER IDLE PROBLEM!!!HELP
OK. I just installed a new 65mm TB and my idle of course started acting up. I have the TPS set at .98 Do you guys think that I should raise the TPS to 1.11. Someone told me that if I go bigger on the TB I need to increase the TPS to 1.11. Anyone let me know what you think.
__________________
94 306 GT 5-speed. BBK headers,BBk h-pipe, Flowmstr exhaust. Aluminum drvshft, 3.73 grs. MARCH pulleys, MAC intake, 9mm wires, short shiftr, MSD ignition,Ported intake mnfld 24lbs injectors, 85mm MAS,100 shot NOS. Best time 13.02 1/4mile.
Sponsored Links
This ad is not displayed to registered members.
Register your
free account today and become a member on Mustang Forums!
07-29-2005, 12:42 AM
#2
6th Gear Member
Join Date: Feb 2005
Location:
Posts: 5,140
RE: ANOTHER IDLE PROBLEM!!!HELP
did you get a new gaset for the IAC valve? No you should leave the tps at .98
07-29-2005, 01:03 AM
#3
New Member
Join Date: Apr 2004
Location:
Posts: 153
RE: ANOTHER IDLE PROBLEM!!!HELP
No, I didn't. I sprayed TB cleaner all over and it seems like there is no leaks. Anything else you might think is up??
__________________
94 306 GT 5-speed. BBK headers,BBk h-pipe, Flowmstr exhaust. Aluminum drvshft, 3.73 grs. MARCH pulleys, MAC intake, 9mm wires, short shiftr, MSD ignition,Ported intake mnfld 24lbs injectors, 85mm MAS,100 shot NOS. Best time 13.02 1/4mile.
07-29-2005, 04:08 AM
#4
New Member
Join Date: Nov 2003
Location: Pittsburgh, PA
Posts: 5,175
RE: ANOTHER IDLE PROBLEM!!!HELP
dont go any higher then 1.0 volts. if you do higher at idle it will affect WOT. you could have a leak or a youre IAC needs cleaned
__________________
powershifting owns....
o yea if your car doesent break ur not driving it like u should
07-30-2005, 12:39 AM
#5
New Member
Join Date: Apr 2004
Location:
Posts: 153
RE: ANOTHER IDLE PROBLEM!!!HELP
What is the best way to clean the IAC?? I don't want to mess it up.
__________________
94 306 GT 5-speed. BBK headers,BBk h-pipe, Flowmstr exhaust. Aluminum drvshft, 3.73 grs. MARCH pulleys, MAC intake, 9mm wires, short shiftr, MSD ignition,Ported intake mnfld 24lbs injectors, 85mm MAS,100 shot NOS. Best time 13.02 1/4mile.
07-30-2005, 11:25 AM
#6
6th Gear Member
Join Date: Feb 2005
Location:
Posts: 5,140
RE: ANOTHER IDLE PROBLEM!!!HELP
spray carb or tb cleaner in the 2 holes until clean and make sure to put a new gasket on it for a tight seal
07-30-2005, 07:07 PM
#7
New Member
Join Date: Apr 2004
Location:
Posts: 153
RE: ANOTHER IDLE PROBLEM!!!HELP
Tnanks guys. IAC must have been dirty. I cleaned it out and problem fixed.
__________________
94 306 GT 5-speed. BBK headers,BBk h-pipe, Flowmstr exhaust. Aluminum drvshft, 3.73 grs. MARCH pulleys, MAC intake, 9mm wires, short shiftr, MSD ignition,Ported intake mnfld 24lbs injectors, 85mm MAS,100 shot NOS. Best time 13.02 1/4mile.
07-30-2005, 07:10 PM
#8
New Member
Join Date: Nov 2003
Location: Pittsburgh, PA
Posts: 5,175
RE: ANOTHER IDLE PROBLEM!!!HELP
it gets gunked up cause of the EGR crap and the oil that is recirculated into the TB
__________________
powershifting owns....
o yea if your car doesent break ur not driving it like u should
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off