Should I go from a low hanging H pipe, with american thunder exhaust, to an X pipe with Magnaflows? Do the magnas come with tips that arent straight cut?

My Magnaflow tips are cut at an angle....

I already have the o/r X and here'sa decent pic of themagnaflow system thatI'm putting onin spring. If you don't do it til mine is installed I'll let you know how it sounds/looks.</P>


http://www.wmsracing.com/pgi-ProductSpec?MAG-15634</P>

nah keep it like it is

I think Stealth302 is looking for more performance mustang30240. </P>


ftp://24.195.148.170/Mustang/peel-out.wav</P>


Right click, save as. That's what my Magnaflow exhaust sounds like with the windows down...</P>


Windows up:</P>


ftp://24.195.148.170/Mustang/part-throttle.wav</P>


The wind noise you hear is actually noise from my crappy tires. <IMG src=smileys/smiley5.gif border="0"></P>

more performance what like 5 horse?

.2-3 faster in the quarter mile.</P>


Don't believe it? You should be making some nice HP with your .40 over 302 &amp; bolt-ons...go to the track and get a couple runs in, then take off your Flowmasters and install a nice Magnaflow cat-back and watch the .2+ gain in the quarter mile. </P>

I know that mags offer much better performance, and as for my way low hanging H pipe, I want everything to be correct, and the current setup doesnt fit the bill.