Milky

I've got my car relatively fast. I don't know the hp it puts out tho [maybe someone good here could ballpark it] I'm to the point where I don't know what else to do.</P>


I've got: 302 long block, cold air induction, 70mm throttle body, cobra intake manifold, GT-40 heads, B-303 cam, Fireball ignition, 3.73 gears, stock T5 trans, pro 5.0 short shifter, BBK shorty headers, off road x pipe, and magnaflow mufflers.</P>


From here I don't know where to go. What else is there to do performance wise...? I'd like to hit the 400hp mark, am I close?</P>


Ya so... thanks to anyone who can help me out a bit...</P>

__________________
1996 Mustang Convertible. 01 4.6 crate engine, Intercooled procharger at 6psi. 426rhp, 424rtq.

harvey041

I'd say that you should get the T-5 Hardend rebuild kit to hold the 400+hp.

Milky

Is that just a rebuild kit with harder parts in order to withstand power?

__________________
1996 Mustang Convertible. 01 4.6 crate engine, Intercooled procharger at 6psi. 426rhp, 424rtq.

primetime5.0

ditch the t-5, my motor is mildy modded and the t-5 cant even handle that, i suggest buying a Tremec TK0 thats what all the big boys use

__________________
R.I.P. Robert H. Western

just your average primered mustang
http://truestreetcars.com/forums/index.php

Milky

Ill end up doing that soon cause my tranny's synchros are goin out I think. </P>


What else could I do thats more minor? Is there much else? I know theres gotta be...</P>

__________________
1996 Mustang Convertible. 01 4.6 crate engine, Intercooled procharger at 6psi. 426rhp, 424rtq.

95Stealth302

How about some 24lb injectors with a new 80mm MAF? And an aluminum driveshaft form FRPP. You could also get some pulleys, new 1.7 rollers, and new suspension to make it hook up nicely - 50-50 shocks in front 80-20s in the rear.

__________________
Black modded 95GT SOLD

New in the garage: Red 95GT ready to become an autoX champ.
As of this week:
Tunable Induction CAI
MGW Shifter
MSD 8.5mm Wires/Cap&Rotor/TFI Blaster Coil
SLP Loudmouth Catback

horatio102

Next step: ditch the GT-40 heads and get some AFR 185's

__________________
91 GT roadster 5.0, black
86 W250 Power Ram 5.9, red
02 Dakota 5.9, silver

Milky

the 24lb and MAF sounds good roller rockers too, and pullets. Ive heard for a while the gt040s are no good, but I dn't mind em at all, Ill upgrade em later on...</P>


Anyone have an estimate to how much hp ive got? roughly...?</P>

__________________
1996 Mustang Convertible. 01 4.6 crate engine, Intercooled procharger at 6psi. 426rhp, 424rtq.

Quik

different cam, juice, turbo, blower,different heads, different intake.

__________________
powershifting owns....
o yea if your car doesent break ur not driving it like u should

Milky

Can anyone suggest a brand of underdrive pulleys. I imagine there all pretty close to the same... Still, I'm not sure...</P>


Thanks</P>

__________________
1996 Mustang Convertible. 01 4.6 crate engine, Intercooled procharger at 6psi. 426rhp, 424rtq.