installing fog/driving lights?

horsie · 07-15-2008, 10:05 PM

I was under the front of my car today and noticed that there are 2 plugs 1 on each side where the for/driving lights go.they are a 2 pin plug.my ? is are these the factory plugs for the lights or not?if so how are they hooked up?do they work separate or come on with low beams or high beams?or do I need to run a switch on my dash?Does anyone have set for sale I would like to install a set as the front needs somthing other than block offs.

v6stang07 · 07-15-2008, 10:15 PM

i have a whole right up in the how to sticky's

horsie · 07-15-2008, 10:55 PM

Sorry I cant find it for a 94 mustang v-6.Can you post the link to it.

v6stang07 · 07-16-2008, 12:51 AM

ohh mine is for a 99-00 but it should be about the same thing

v6stang07 · 07-16-2008, 12:51 AM

http://www.mustangforums.com/m_25193...tm.htm#2519320

my94pony · 07-16-2008, 12:53 AM

i have an extra set for a 94 mustang, pm me if you want them i can also tell u how to do it if u cant find it its pretty easy

Matts 85 LX · 07-16-2008, 09:55 AM

The 94/95 models came pre-wired from Ford. All you need is the foglights, a relay that goes in the fuse box in the engine bay, and thefoglight switch that goes in the center consule.

Matthew

horsie · 07-16-2008, 11:50 AM

Thanks everyone for your time .I also thought it might be a bit of a job myself but as stated I have found that the 94 and 95 only came pre wired HOW NICE.this has got to possibly be the easiest upgrade to be done to the 94&95 mustang v-6 lol. PS, PM has been sent.

horsie · 07-16-2008, 11:58 AM

Email sent to 94pony.

Matts 85 LX · 07-16-2008, 11:38 PM

Its great it it worked! I still cant get mine to work, Ive replaced the wiring in the center counsel, and the foglight button, the fuse, and the relay and cant get mine to work! Its pisses me off so much [:@]!

Matthew