Ok I bought an edelbrock performer rpm nitrous kit for my 351W carb motor. I wanted to know what it can hande. It is a 69 block with 69rods and crank with trw forged pistons. I was thinking it should be fine with the 100 shot. Does this sound alright? Can i go 150? Thanks
Sponsored Links
This ad is not displayed to registered members. Register your free account today and become a member on Mustang Forums!
you will probably be safe going 200-250 to be honest, i'd start w/ 100 jets and work up to 150's while getting used to it and playing at thetrack where u can be consistent and make small changes. you might find you like 100 jets better than 150
after that if you want more... go for it, but wait til you read the car better on the juice to go too high
__________________
'93 calypso notch 6th stang and counting
nitrous oxide is proof there is a GOD and he wants us to be happy
btw thats really nice kit, i'm using and eddy bottle from that same rpm kit, look at the bracket that eddy makes that mounts on the carb and the selonoids mount to it. makes a nice clean installation.
__________________
'93 calypso notch 6th stang and counting
nitrous oxide is proof there is a GOD and he wants us to be happy
First time nitrous.
