Mthd11

So Im about to give my engine the initial oil prime and all i get is fuel leaking from the hard lines to the flexible lines. I never had this issue before and idk what to do... for now i tried some rtv but its drying and ill have to try again tomorrow.. any ideas?.

http://i35.photobucket.com/albums/d198/mthd_1990/P7130014.jpg
http://i35.photobucket.com/albums/d198/mthd_1990/P7130017.jpg

__________________

93 LX Soon to be 2.3t

92lxsleeper

clean the hard line off, and install a new o ring gasket in the plastic part

__________________
I'll kick your sorry arses so hard you'll kiss the moons.

1997 Chevrolet K1500
4.3L Vortec V6 (350 minus 2 cylinders) with 200K miles (RUNS LIKE NEW!)
Hypertech Power Programmer

Pathfinder 7.5' hydraulic snowplow


*plans?*

to make money plowing in winter and buy a 7.3 powerstroke next year.

sleeper_inc

Looks like the gasket is missing inside the line. Put one back and sand the hard line with some steel wool to take the rust off.

__________________

2.3 turbo / no mods rly / 15 PSI / around 180 RWHP / 30 mpg
If you need a harness done or some parts for the 2.3 turbo, PM me

Mthd11

gonna try o rings and i already sanded the rust... i think i ripped off the spacer that was originally on the line... was a ridged piece of plastic on the hardline

__________________

93 LX Soon to be 2.3t