steve04cobra

So I installed new Rotors (R1 Concepts Drilled/Slotted) on the Front and Back and new Pads (Posi Quiet) and when i'm driving theresa clank noise like something is loose we took the tires off and nothing was loose so has anyone had this problem or know wat it could be?

__________________

2004 Cobra
Magnaflow xpipe/cb
Pro 5.0 Shifter
JLT CAI

RuffCat

maybe you lost a slide for the calipers? Ya know those metal inserts the pads slide into. That little bit of movement can cause a clank or similar.

__________________
For Sale:
BBK 190lph Fuel pump kit $80 shipped less than 50 miles


1997 Cobra Vortech V2 SQ 3.3" Pulley , Steeda Powerpipe, LT's, Magnaflows, 473rwhp 468rwtq @11psi

Hegotgame

Check the metal shield to see if its rubbing.I did my breaks a month ago and had this problem.

__________________
2003 Cobra Dyno'd at 500rwhp, 506tq, Ported stock blower, Afco heat exchanger, Billetflow pulleys, Jba Headers, Jba H-pipe,cai, Magnaflow Exaust, Accufab tb, Exedy 26t twindisk... and more

steve04cobra

We checked the shield and pushed it back just to make sure and that was not the problem...im going to check the inserts to see if we can make a noise w/ them

__________________

2004 Cobra
Magnaflow xpipe/cb
Pro 5.0 Shifter
JLT CAI

steve04cobra

ok so heres the latest we have come to the conclusion that it is the brake pads they are smaller than the caliper, and they have some movement in there which can cause the noise..does anyone know how i can fix it besides getting new pads

__________________

2004 Cobra
Magnaflow xpipe/cb
Pro 5.0 Shifter
JLT CAI