steeda lowering kit installed

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

steeda lowering kit installed

Printable Version

Mustang Forum >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific >> steeda lowering kit installed

Page: [1]

Message

<< Older Topic Newer Topic >>

steeda lowering kit installed - 5/10/2005 12:28:13 AM

afixer

Posts: 1843
Joined: 3/10/2005
Status: offline

So a couple of days ago while my v6 was getting the front end poping tsb fixed my bud swapped my springs they were out anyway. We used the steeda pro lowering kit. 1" front 1 1/4 rear. ride is good went over a couple of speed bumps no prob. It took about an hour but he has all the cool tools (like ****oli's Dad). he also had to realign the front end because the toe and camber were off. The mustang has no camber adjustmet so he ordered a kit from his supplier and will install it when he gets it. the steeda camber kit was to expensive. 189.00. The first 2 pics are after and the last three are before. I have a friend with a GT, he rode with me yesterday and loved it so we ordered him a kit too!. my wife likes the ride but hates the improved cornering (faster in the turns!) funny thing was after we did this most of the ford mechs were looking at it and we all agree it is a great look not to low and level. couple of the guys even felt the car should come that way.

Thumbnail Image