kraze_e

well i got my new alpine cda-9884 installed today at a shop. everything seemed fine but theres like no bass in the car. i tried searching around and i belevie its because the amps arent turning on. wut wire is used to turn on the amps and what can i do to fix this. thanks guys

03 mustang, mach 460

__________________

03' BLaCk GT 5 sPeEd
Nitto D/Rs, 4.10s, Sportlines, MM CC Plates, MGW Shifter, Flows, O/R H, Grill Delete, Diablo , Driver Mod, Hot gurl in passenger seat

SMOKED TAIL LIGHT TINT

southern4life_99

The most common way I have seen/done is to run the remote wire from the power antenna wire to the amp. On your amp there should be a spot for a wire that says rem, that is your remote wire. That tells the amp to turn on when the radio is on. Also take a multimeter and verify that you are getting power to the amp from the battery and when the radio is on the remote wire should be hot too. First thing I would do though is check all your fuses(including the one on the wire coming from your battery to the amp)to make sure none of them are blown. Hope this helps.

__________________
Do you f*** all your cousins, or just the ones you find attractive?

ttocs

if you paid for it I would print up page 2 of my cardomain page and take it in there. You paid for it I can't believe they let it out of the shop with out the bass on.

You want to connect the blue/white on the deck to the blue, and the blue/white in the cars hrns.

__________________
http://www.cardomain.com/ride/2395420