Ford Mustang Forums - Ford Mustang Classifieds - MustangForums.com Photo Galleries - MustangForums.com Chat Room - Create an Account - Mustang News

Go Back   MustangForums.com > Ford Mustang Tech > 2005 - 2008 Mustangs




Reply
 
Thread Tools
Old 06-08-2008, 08:55 PM   #1
mynameismike65
3rd Gear Member
 
mynameismike65's Avatar
 
Join Date: Oct 2007
Location: Milwaukee
Posts: 775
Default Lowering springs/ New photo compilation

Well I figured that I would put these two threads into one because nobody looks in the video section[>:]....So I thought that I would include a tech question to make it fit the general setion. Anyhoo after I made this little photo compilation with my buddy and his Supra MK3 I got to thinking that springs and tint are my next priority. I was looking at the FRPP springs. Do you think I need to go with an adjustable Panhard bar as well? And how much did you guys pay for the springs and labor? Thanks
Heres the Vid BTW.....

http://youtube.com/watch?v=5d696yrfZEM
__________________
06 GT
Black/Black
5 spd
Mac a/b
Hurst Shifter
Tint

__________________
|.....Overnight.....................| ||
|........Japan Parts................||'|";,___. <~~~~~~~~~~~~~ \_ OH NO'S! It's Toretto!
|_..._...____________======||_|_|...,]------------------__/----\___
"(@)'(@)""'''''''''''''"'''"**|(@)(@)*****"(@)--------------~['(@)***(@)_'\
mynameismike65 is offline   Reply With Quote
Sponsored Links
This ad is not displayed to registered members.
Register your free account today and become a member on Mustang Forums!
Old 06-08-2008, 09:01 PM   #2
Vertigo
2nd Gear Member
 
Join Date: Mar 2007
Location: Boynton Beach/Fort lauderdale, FL
Posts: 483
Default RE: Lowering springs/ New photo compilation

Quote:
ORIGINAL: mynameismike65

Well I figured that I would put these two threads into one because nobody looks in the video section[&gt;:]....So I thought that I would include a tech question to make it fit the general setion. Anyhoo after I made this little photo compilation with my buddy and his Supra MK3 I got to thinking that springs and tint are my next priority. I was looking at the FRPP springs. Do you think I need to go with an adjustable Panhard bar as well? And how much did you guys pay for the springs and labor? Thanks
Heres the Vid BTW.....

http://youtube.com/watch?v=5d696yrfZEM
If you do springs make sure you save up for the shocks/struts so you can do them at the same time. And yes you will need an adj. panhard due to your driver side wheel shifting out past your wheel well. Springs are about $250 or so and labor for springs, shocks/struts, panhard install and alignment should run you about $300 depends where you go. You will also need a set of camber bolts or plated if you go 1.5" drop or more.
__________________

Paxton Crew Member
Boomtube Crew Member

Quote:
ORIGINAL: Stkjock

pics or STFU!!
Vertigo is offline   Reply With Quote
Old 06-08-2008, 09:10 PM   #3
mynameismike65
3rd Gear Member
 
mynameismike65's Avatar
 
Join Date: Oct 2007
Location: Milwaukee
Posts: 775
Default RE: Lowering springs/ New photo compilation

Quote:
ORIGINAL: Vertigo

Quote:
ORIGINAL: mynameismike65

Well I figured that I would put these two threads into one because nobody looks in the video section[&gt;:]....So I thought that I would include a tech question to make it fit the general setion. Anyhoo after I made this little photo compilation with my buddy and his Supra MK3 I got to thinking that springs and tint are my next priority. I was looking at the FRPP springs. Do you think I need to go with an adjustable Panhard bar as well? And how much did you guys pay for the springs and labor? Thanks
Heres the Vid BTW.....

http://youtube.com/watch?v=5d696yrfZEM
If you do springs make sure you save up for the shocks/struts so you can do them at the same time. And yes you will need an adj. panhard due to your driver side wheel shifting out past your wheel well. Springs are about $250 or so and labor for springs, shocks/struts, panhard install and alignment should run you about $300 depends where you go. You will also need a set of camber bolts or plated if you go 1.5" drop or more.
Thanks man....I'm hoping to achieve the look of your car eventually....however Im not going DD in the front.
__________________
06 GT
Black/Black
5 spd
Mac a/b
Hurst Shifter
Tint

__________________
|.....Overnight.....................| ||
|........Japan Parts................||'|";,___. <~~~~~~~~~~~~~ \_ OH NO'S! It's Toretto!
|_..._...____________======||_|_|...,]------------------__/----\___
"(@)'(@)""'''''''''''''"'''"**|(@)(@)*****"(@)--------------~['(@)***(@)_'\
mynameismike65 is offline   Reply With Quote
Old 06-08-2008, 09:14 PM   #4
Vertigo
2nd Gear Member
 
Join Date: Mar 2007
Location: Boynton Beach/Fort lauderdale, FL
Posts: 483
Default RE: Lowering springs/ New photo compilation

Quote:
ORIGINAL: mynameismike65

Quote:
ORIGINAL: Vertigo

Quote:
ORIGINAL: mynameismike65

Well I figured that I would put these two threads into one because nobody looks in the video section[&gt;:]....So I thought that I would include a tech question to make it fit the general setion. Anyhoo after I made this little photo compilation with my buddy and his Supra MK3 I got to thinking that springs and tint are my next priority. I was looking at the FRPP springs. Do you think I need to go with an adjustable Panhard bar as well? And how much did you guys pay for the springs and labor? Thanks
Heres the Vid BTW.....

http://youtube.com/watch?v=5d696yrfZEM
If you do springs make sure you save up for the shocks/struts so you can do them at the same time. And yes you will need an adj. panhard due to your driver side wheel shifting out past your wheel well. Springs are about $250 or so and labor for springs, shocks/struts, panhard install and alignment should run you about $300 depends where you go. You will also need a set of camber bolts or plated if you go 1.5" drop or more.
Thanks man....I'm hoping to achieve the look of your car eventually....however Im not going DD in the front.
Thank you for the kudos, To each his own on the wheels . As most people say on here just plan out your mods so you dont burn money. Goodluck and keep the black beauty clean [8D]
__________________

Paxton Crew Member
Boomtube Crew Member

Quote:
ORIGINAL: Stkjock

pics or STFU!!
Vertigo is offline   Reply With Quote
Reply



Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Advertising

Featured Sponsors









New Sponsors


All times are GMT -5. The time now is 09:26 AM.

© Internet Brands, Inc.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.