157db

Anyone know if there are dropped
spindles available for the S197 Mustang?
I want to slam the front end but want to
keep the stock steering geometry without
having to add camber bolts or bump steer
kits to correct for shorter springs.

[IMG]local://upfiles/69445/F543144B77804C338E769A3807667221.jpg[/IMG]

__________________
AiRaid CAI
Saleen Short Shifter
Poly Shifter Bushings
StreetScene Eleanor Grill
Roush Hoodscoop
Roush Window Louvers
GT Spoiler
Roush Rear Shocks/Springs
GT Front & Rear Anti-Sway Bars
Prothane Poly Sway-Bar Bushings
GT M/T TakeOff Muffler
Pony Fender Emblems
CDC Rear Decklid Panel
CDC Sequentials
MossMustang Taillight Benzels
18x8.5" Polished Aluminum Bullitts
255/45ZR18 BFG g-Force KDW2s
Raptor Shift Light
MSD DashHawk

Argonaut

Take a read thru this: http://corner-carvers.com/forums/showthread.php?t=34665

The picture you posted looks like the Grantetelli spindle.

EDIT: note the thread is primarily about the Race Craft Drop spindles for the SN95. But keep reading, I'm pretty sure it says in there somewhere you can get a version for the S197.

__________________
07 Vista Blue GT 5spd, BBK CAI, Brenspeed, Raptor, MGW Shifter, 4.10s, Violators, Cervini's Grill, Eibach Pro, D-Specs, Spohn adj PHB & UCA, J&M Camber Plates

Shard Phoenix

Yup. They exist.... unless you already have quite a lot of other suspension work don theywont really aid handling except to lower your CG a little. Be better off with a lowering set up. But if you just want looks go for it. Just a random google search will net you the granetelliones http://www.jdsperformance.com/index....m&inmake=0. You will need 18" or larger rims btw.

If these really are your only front suspension mod I would do some research before you drop $400 on a set.