07musclemustang

Hello all,
I just got a sweet hook up for used cirle track slicks from a friend. I know there not ideal but there free and if I could make em fit I better get a driveshaft loop... Does any one know of how to make the 27.0/10.0/15 fit? what kind of offset would be needed? Will it clear the brakes?
It would be nice to get some grip and beat my 13.6
Thanks

__________________
07 GT Rag
Steeda 90mm Intake and Tube
Steeda UDP
SCT Xcal 3
Pypes Mid Muffs
FRPP X pipe
Hurst Short Shift with T-Bar
Innovate Wide 02

Intervention

I tried to fit 15" rims on my S197.... it failed..

I believe only bogart 15" clear the rear brakes.

I do have sone 275/40/17's mounted on cobra r rims if your interested. Worked awesome on my GT

__________________
2007 Mustang GT Alloy Clearcoat w/ Silver Stripes
JLT CAI w/ custom 93 tune
FRPP 4.10 * MGW
281 RWHP ~ 301RWTQ
Tuned by Performance Dyno

PLstang

Your gonna need some Bogarts to make them work. But it can be done. I'm running 15" bogarts wit 28-10.5's

__________________

2007 GT Vista Blue, 700+rwhp
Grabing Her gears!!! Fast, Faster, and Hold on!
10.30 @ 131 in the 1/4, 6.6 @ 110 in the 1/8, 1.5 60' (with old S/C new times to come)

2009 GT500 Grabber Orange Vert. 540 rwhp
Yeah, it's my slow car!!

07musclemustang

I kept the spare tire in the back and maybe another 20lbs and a full tank and nothing but spin. I'm gonna try leaving on a raised idle via tuner and ive gotta look into those bogarts. how much would you say a pair is worth????

__________________
07 GT Rag
Steeda 90mm Intake and Tube
Steeda UDP
SCT Xcal 3
Pypes Mid Muffs
FRPP X pipe
Hurst Short Shift with T-Bar
Innovate Wide 02

PLstang

A set of bogarts will run you around $1500 to $1700 depending on what you get.

__________________

2007 GT Vista Blue, 700+rwhp
Grabing Her gears!!! Fast, Faster, and Hold on!
10.30 @ 131 in the 1/4, 6.6 @ 110 in the 1/8, 1.5 60' (with old S/C new times to come)

2009 GT500 Grabber Orange Vert. 540 rwhp
Yeah, it's my slow car!!

07musclemustang

um ok wow so much for slicks.... I guess im not ready $$$ for that??? how much of a difference would the slicks makeon a bolt onn/a gt?? is it worth it? wouldIneed todo anything else to the car as not to hurt it?Can the stock rear end, trans, driveshaft, clutch, axles, ect takea hard launch on slicks???ShouldI spend the 1800 on street slicks and rims????BAHHH

__________________
07 GT Rag
Steeda 90mm Intake and Tube
Steeda UDP
SCT Xcal 3
Pypes Mid Muffs
FRPP X pipe
Hurst Short Shift with T-Bar
Innovate Wide 02

Intervention

I used my slicks no problem...

Ran 10 times with not a single issue, although i could tell the clutch was getting a bit heated at the last run because i hot lapped her 3-4 times.

Bogarts are not worth it to the everyday dragger. I mean, i'd sell you my slicks for 399 a fraction of the ridiculous 1800....

__________________
2007 Mustang GT Alloy Clearcoat w/ Silver Stripes
JLT CAI w/ custom 93 tune
FRPP 4.10 * MGW
281 RWHP ~ 301RWTQ
Tuned by Performance Dyno