MustangBabe93LX

I've been trying to get this crank bolt off and it just won't move i've put an air gun on it and that did nothing and then a ratchet and turned the car over a little bit and that didn't work. If anyone knows another way that could possibly take it just let me know.

sleeper_inc

Shove a crow bar in there, and use a wrachet with a 4ft snipe

__________________

2.3 turbo / no mods rly / 15 PSI / around 180 RWHP / 30 mpg
If you need a harness done or some parts for the 2.3 turbo, PM me

MustangBabe93LX

well it's a bolt on my waterpump and there is no room to stick the crow bar in and i have no idea what a snipe is lol...i'm thinking i have to heat it up with a torch but then again all i can heat up is the head of the bolt and by the time i get to the thread part the seals would burn up so i have no idea what the heck to do...

92lxsleeper

snipe is a long handle... usually just a cast iron 1/2" pipe over the handle of the socket.

__________________
I'll kick your sorry arses so hard you'll kiss the moons.

1997 Chevrolet K1500
4.3L Vortec V6 (350 minus 2 cylinders) with 200K miles (RUNS LIKE NEW!)
Hypertech Power Programmer

Pathfinder 7.5' hydraulic snowplow


*plans?*

to make money plowing in winter and buy a 7.3 powerstroke next year.