new rear
 

im looking at putting in the 8.8 rear end down the road and was wondering were i should go to look for this?

RE: new rear
 

forum for sale sections, junkyards, ebay. just cruise the net and a few forums, they arent too hard to come by

RE: new rear
 

well which vehicle is it coming off of.?

RE: new rear
 

'94-04 V8 mustangs except the '99 Cobra, '00 Cobra R, '01 Cobra and '03-'04 Cobras

Dont know if the 8.8" rears out of the Crown Victoria/Grand Marquis will bolt up, but i dont doubt that they do.

RE: new rear
 

Mach's are the best because of their gearing.

RE: new rear
 

ok thanks i'll start looking

RE: new rear
 

NOOOOOOOOOOOOOOOO!!!!!!!!!!!!

only 94-98 will fit 94-98, and 99-04 will fit 99-04, there is a width difference and the lower control arms are different.

FIXED IT! LOL

RE: new rear
 

^ 94-84? i think theres a typo not sure if he meant 94-04 but im thinking 94-98

RE: new rear
 

ok so i have a 2000 and i know were a v8 is and it is 99-04 so i will so see how much they want. will this be able to bolt up or will i need to change something like shocks, springs. also what gears are recomended to install before it goes on the car.

RE: new rear
 

auto - 4.10s. manual - 3.73s
blown auto plans - 3.73s. blown manual plans - 3.55s

at least thats what im goin with. after i hit the powerball, ill be using for my auto : 8.8 inch rear end, with 3.73 gears, all new hardware, a carbon fiber driveshaft, and an auburn posi diff. that should hold my 4.2 m112 build!!! i WANT 400 WHP!