Mustang Forums   Mustang Classifieds   Photo Gallery   Calendars   Search   Live Chat   Contact MF   Sponsors
  Mustang Recalls   Mustang TSB's   News   Timeslips   Timeline   Wallpaper   Member List   Register   Login

no start after changing computer and wiring harness

  Printable Version
Mustang Forum >> Ford Mustang Tech >> 5.0 Mustang >> no start after changing computer and wiring harness Page: [1]
Login
Message << Older Topic   Newer Topic >>
no start after changing computer and wiring harness - 5/15/2008 9:35:05 AM   
88ttopstang

 

Posts: 26
Joined: 3/11/2008
Status: offline
my car was sd but i bought a computer and wireing hraness out of a 91 5.0 and i hooked everthing up and have no spark or fuel any ideas
Post #: 1
RE: no start after changing computer and wiring harness - 5/15/2008 11:28:16 AM   
88ttopstang

 

Posts: 26
Joined: 3/11/2008
Status: offline
any help

(in reply to 88ttopstang)
Post #: 2
RE: no start after changing computer and wiring harness - 5/15/2008 12:20:51 PM   
Pony 5.0


Posts: 244
Joined: 4/7/2007
From: Riverview, FL
Status: offline
Are you sure the computer was good? I would start looking for loose or missing grounds.

_____________________________

90 GT
GT40X B-cam, Systemax, PP 70mm TB,ProM-80@24#, 1.6rr/1.7rr, BBK LT & X-pipe, Magnaflow catback,
Walbro 255, Accufab fpr, UPR subs/uppers/lowers, Battle Boxes, Baer, Eibach, Ford truck 3.55 w/ Moser 31's

(in reply to 88ttopstang)
Post #: 3
RE: no start after changing computer and wiring harness - 5/15/2008 1:58:29 PM   
88ttopstang

 

Posts: 26
Joined: 3/11/2008
Status: offline
well the computer is good i found out what it is i just dont know how to fix it on the diver side there is 2 plugs one plugs in off the new wireing harness and the thothe i dont event have a plug for it so i was messin with it and jumped some wires and got the car to start any ideas need help

(in reply to Pony 5.0)
Post #: 4
RE: no start after changing computer and wiring harness - 5/16/2008 3:53:22 AM   
dave1170

 

Posts: 44
Joined: 2/24/2008
Status: offline
The new harness you put in probably has just one brown plug correct? The harness coming out of the drivers side firewall has a black and grey plug right? If this is the case you need to get a dash harness out of a 91-93 5.0, it will have just the one brown plug and you should be all set.

(in reply to 88ttopstang)
Post #: 5
RE: no start after changing computer and wiring harness - 5/16/2008 11:00:27 AM   
88ttopstang

 

Posts: 26
Joined: 3/11/2008
Status: offline
yea it dose if i use the mass air computer and the sd wiring harness and take out the wiring for the mass air meter and wire it up would that work if so how would i do it cause i know that is what u do with the mass air conversion kits that u buy

(in reply to dave1170)
Post #: 6
RE: no start after changing computer and wiring harness - 5/16/2008 11:30:57 AM   
dave1170

 

Posts: 44
Joined: 2/24/2008
Status: offline
I'm not sure on that one, i've never done a sd to maf swap. Sorry.

(in reply to 88ttopstang)
Post #: 7
RE: no start after changing computer and wiring harness - 5/16/2008 11:35:48 AM   
88ttopstang

 

Posts: 26
Joined: 3/11/2008
Status: offline
ok kool thanks man

(in reply to dave1170)
Post #: 8
RE: no start after changing computer and wiring harness - 5/16/2008 2:41:33 PM   
88ttopstang

 

Posts: 26
Joined: 3/11/2008
Status: offline
somebody help please

(in reply to 88ttopstang)
Post #: 9
RE: no start after changing computer and wiring harness - 5/16/2008 7:28:46 PM   
88ttopstang

 

Posts: 26
Joined: 3/11/2008
Status: offline
i got it if any1 wants to do a mass air swap cheap mine cost me 80 bucks

http://www.corral.net/tech/powerplant/maf_tech_2.html

http://www.stangnet.com/tech/maf/massairconversion.html


(in reply to 88ttopstang)
Post #: 10
RE: no start after changing computer and wiring harness - 5/16/2008 11:21:36 PM   
primetime5.0


Posts: 7409
Joined: 12/2/2003
From: United States
Status: offline
primetime5.0's photo gallery
mine did the same thing I bought  harness out of a 90+ I ended up trashing it, and splicing into my original 88 harness to make it work

_____________________________

R.I.P. Robert H. Western

just your average primered mustang

(in reply to 88ttopstang)
Post #: 11
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 

 
Mustang Forum >> Ford Mustang Tech >> 5.0 Mustang
Jump to:
Forum Rules & FAQ
Today's Posts
Most Active Topics
RSS Feeds
Make A Donation

Mustangs:
Classic Mustang
Mustang II
Fox Body Mustang
sn95 Mustang
New Edge Mustang
s197 Mustang
Mustang Clubs
2007 GT500 Mustang
2009 Mustang
Ford Mustang Prices


Featured Sponsors
Advertising Info

Top 10 Posters
pro50sc17922
nanaki14685
88bluegt14536
dan04cobra14532
addermk214002
ride of the 13716
hotrods_n_bo13328
2000gt4.612516
mustangman0211994
1slo8511751

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion

MustangForums.com is not affiliated with or endorsed by Ford Motor Company.