94Mustangv6

Hello I was thinking of removing my A/C system this weekend and wondered if I could jut remeasure the belt length without the A/C pulley and buyshorter belt. Im fully capable of removing it but I’m not shur if I can just buy a shorter belt our not.Thanks for any help.

LilRoush

You'll want the A/C delete pulley from Ford. I forget the part number off the top of my head though.
Then you use the stock belt. I'll see if I can find a pic of my set up for you.

__________________
~Matt
2000 Roush #5004: F150 displacement topped with an M112.

New heads done, 2.3 Whipple in progress, dyno coming soon.....

songtradingusa

just out of curioisty, why do you wanna delete your a/c? if you do all that, you should remove all of your a/c components as well...youlkl save a LOT of weight that way.

__________________
My mods:

http://mustangforums.com/forum/showt...282316&page=10

Still slow...for now. More to come!

any mma fans?

http://cagesidemma.com/adshoso.html

LilRoush

I gutted out all the stuff from my A/C system.Probably 30 lbs of crap between the compressor, lines, heat exchanger in the front and all the misc junk that is with it.

__________________
~Matt
2000 Roush #5004: F150 displacement topped with an M112.

New heads done, 2.3 Whipple in progress, dyno coming soon.....

LilRoush

I'll get a better pic later. But this kind of shows the delete kit right from Ford.

__________________
~Matt
2000 Roush #5004: F150 displacement topped with an M112.

New heads done, 2.3 Whipple in progress, dyno coming soon.....

94Mustangv6

I am going to remove all my a/c components as well i was just wondering if i could by a shorter belt our if i had to buy the A/C delete pulley from Ford. So if i do remove my A/C i have to buy the A/C delete pulley i just cant put a smaller belt on? I just want to make shur im understanding every thing. Thanks for the help.

LilRoush

Yeah, there is no way to just run a shorter belt without doing some major work and fabricating some custom pulley mounts.
Here is a better pic of mine:

__________________
~Matt
2000 Roush #5004: F150 displacement topped with an M112.

New heads done, 2.3 Whipple in progress, dyno coming soon.....

94Mustangv6

Ok thanks for all the help LilRoush.

robinson209

I wish I knew what a A/C Delete was before I had to replace my entire system last summer for $1,000!!!!!![:@][:@][:@][:@][:@][:@][:@][:@][:@][:@][:@]

__________________
2001 3.8L V6 Convertible

mysteed

Are you removing it for less parasitic loss? If so don't waste your time as when you don't have the AC on the pulley spins freely.

__________________
-Nathan
Mysteed Preformance
Home of the 1996-2004 V6 M112 supercharger kit

Sponsored by: Super Six Motorsports, VMP Tuning, and Autobadges.com