larietrope

Never changed a wiper motor, how hard is it ? Any source for a Motorcraft replacement ?
Thanks.

projectresto83

Remove the cowl panel and unclip the wipers from the motor, unplug it and take out the 3 bolts and its out. How do you knwo the motor is out and not a relay or the switch?

__________________

http://s284.photobucket.com/albums/l...%20Resto%2083/

stang8689

Check the ground too. I think theirs a 9/16 bolt under the cowl

__________________
89 2.3 Turbo, 82 T-Top Notch 5.0, 86 LX T-Top 5.0 roller and 86 GT Black in and out with Gt 40X Heads, Smoothed Engine Bay, Battery in Trunk, SLP's, Bolt-on's

Ryan5.0

I hate to hijack this thread, but I must. My wipers will only operate in delay or low speed mode. When switched to high the wipers stay on low speed. I assumed the switch was bad (not switching to high speed) so I replaced it and no change (except now I don't have the faded turn signal lever any more). Do you guys think its the motor or relay. If its the relay, where is it located? Any help is much appreciated.

__________________
1989 LX Hatch 5 Speed
Bone stock except for K&N, Flowmaster Catback and MGW shifter
Pics soon.