9tyfiveo

So, today, I was driving my mustang around after getting some new tires feeling them out. To make a long story short, I hear a hissing/bubbling sound under the hood, after inspecting why i'm loosing my antifreeze/water, I see where the seal is leaking. I drew a diagram of where it is leaking on a motor pictureI found on another site to show where it is. can anyone tell me what the plate is, how hard it is to replace, or basically whatI have to do now?

__________________


90 stang lx 5.0
66 stang coupe 302
67 stang fastback gt 390 with factory a/c numbers ma

primetime5.0

its leaking at the timing cover to the block?

__________________
R.I.P. Robert H. Western

just your average primered mustang
http://truestreetcars.com/forums/index.php

TTGreenSN95

Thats the timing cover theres no water where your pointing too only oil behind it, there are 2 water passages on either side of it. Are you sure its not leaking from the intake where the rad. hose goes and dripping on the timming cover?

__________________

TTGreenSN95

either way it just needs new gasket or a rad. hose.....

__________________

9tyfiveo

So there is no water to come through there? if not, i will have to check and see if it is not just above it where the thing comes into the motor.

__________________


90 stang lx 5.0
66 stang coupe 302
67 stang fastback gt 390 with factory a/c numbers ma