Somehow I feel like it's not on right...

http://img263.imageshack.us/my.php?image=dscn3320bd8.jpg
http://img140.imageshack.us/my.php?image=dscn3321gh5.jpg
http://img140.imageshack.us/my.php?image=dscn3317ft9.jpg
http://img91.imageshack.us/my.php?image=dscn3316ix9.jpg

What do you guys think?

I dont like how the power wire is up like that, but other than that, it's a clean install.

Nice having the lights stay bright at idle isn't it?

? Looks like speaker wire. I wouldn't use it. Bad wiring + Mustang = Fire. Is it a 3G or 6G upgrade. Is there a megafuse in the wiring?

It's outta a 95 GT so it's a 3G. And no, no megafuse. I've seen this done with speaker wire before. All seems to work fine[8D]

Anyone know if this would better my ignition setup since I have the DP heads?

THICKER WIRE!!!!!!!!!!! you could set your car ablaze with the thin wire you're using below your power wire

If you guys read this months issue of 5.0 mustangs, thats what it says to do with both black/orange wires...

ORIGINAL: mg man 75
? Looks like speaker wire. I wouldn't use it. Bad wiring + Mustang = Fire. Is it a 3G or 6G upgrade. Is there a megafuse in the wiring?

I ran some 4 gauge speaker wire on my '89 GT with the 3g alt upgrade. It's been working fine for over a year. Just have to make sure to wrap it with something... the insulation on most speaker wire doesn't like heat in the least :D I wrapped mine in that black conduit that's all over the factory wiring harness.

I installed a 175A megafuse aswell. using bolts to clamp it to the wire because i was too lazy to run to the store [8D] Then wrapped that in electrical tape

Actually I just ran one of my friends last night but he didn't have money to buy a thicker wire at the time. I ran the two black wires for the moment & another black/orange for safety. The thing that worries me about the two black wires is they join into one smaller gauge wire with a fusable link. If the two black wires ran straight to the solenoid i don't think it would be so bad, but that's not the case.