I have done a lot of research on this subject and have searched several forums and would like to know some creative and factory looking install on a toggle switch. I need a toggle switch for a linelock so it has to be accessible and out in the open. I am thinking of utilizing a black rocker switch or one of the toggles with a black safety cover over it. I would like something that isn't an eyesore and looks clean and factory, but not too concealed and out of reach. I have considered a cup holder panel but since I only need one rocker and a momentary switch for a trunk popi don't haveenough switchesto warrant one of the cup holder panels. Has anyone else come up with a different kind of panel or something nice? Please post pictures if you have any! Thanks.

Kevin

If you pop out the headlight controls, you can drill a hole into that panel and use it for a single toggle. I did it and it looks great.

http://i173.photobucket.com/albums/w41/lordguyton/wheel2.jpg

That's a pretty good option! I could put a black rocker and then a black momentary switch on there and it would look very good! Thanks for the picture! Anyone else have any ideas?

I put mine here. It's out of the way, but easy to get to. I didn't use a momentary switch, just a rocker. That way I can shift to second during the burnout if I'm not getting enough heat in first.

http://farm3.static.flickr.com/2067/2292112271_cc316b24eb_o.jpg