I installed a used BBK fuel regulator and my pressure wouldn't drop below 65 PSI. I thought it was a bad regulator so I bought a new Kirban and installed it today. My fuel pressure is stuck at 65 PSI and wont go up or down. If the engine is running and I open the throttle the pressure will drop to around 55 PSI. What could be my problem? pinched return line? oversized pump? Please help, I'm open to any suggestions.

Thanks,
Chris

Suggestion........ disconnect the fuel return line from the fuel rail, prime the fuel pump engine off, and confirm fuel pressure + fuel flow from the return line connector at the rail. LUK

are you sure your gauge is not stuck?? giving you a false positive??

yea id change the pressure gauge before i went any further man, its a cheap part to ruel out before u get into the pump and what not,

If the gauge drops to zero and rises to 70, wouldn't it stop at 45 or so if the pressure was actually 45? The gauge doesn't stay at 65 when the car's off.

It is very common for the fuel pressure gauges to go bad!!! Looks there first.

are you disconnecting the vac line while setting the fuel pressure?

ORIGINAL: FivePointOhh

are you disconnecting the vac line while setting the fuel pressure?


Yeah, I disconnected the vacuum line and capped it. I'm going to disconnect the return line at the fender and place it in a bucket to catch the fuel. That wont cost me anything and will let me know if my return line's blocked. If that doesn't do anything I'll replace the fuel gauge.

One other reason I don't think it's the fuel gauge. I had a guy at my brothers work do an emissions test when I got the new motor in. All the readings came back like it was running real rich, so I assume with that and the pressure reading high that the pressure MUST be high. LIke I said though I'll check the return line then the gauge.

Has anyone ever experienced a problem with the return line?

My prayers have been answered, thank you God!

apparently I kinked the hose at the fender when I did my engine swap a couple weeks ago. I fixed the line, adjusted my fuel pressure, adjusted my TPS and timing and now the car is running like a beast.

Thanks for all the suggestions guys. Now it's time to go enjoy my new motor with the top down!!!