Cut outs

Printable Version

Mustang >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.6L V8 Specific >> Cut outs

Page: [1]

Login Message << Older Topic   Newer Topic >>

Cut outs - 5/11/2008 1:38:31 AM    v8pilot   Posts: 343 Joined: 3/5/2007 Status: offline     So i recently purchased 2 manual cut outs the one with cables you have to pull "mr.gasket`s"     What i plan on doin sense i have already  butchered my stock H pipe. I had an exhaust shop home make an Offroad H pipe. so i will install cut outs by tranny.   My other friend has a 335i whom took off his secondary cats. which are alot less restrictive then  stock gt cats. I plan on installing the cats after my cut outs with my current stock mufflers. So its sounds super quiet. then all of the sudden a monster gets unleashed. I am hoping i can shoot flames   < Message edited by v8pilot -- 5/11/2008 1:39:18 AM > _____________________________ -07 JLT II & XCalib 2 O/R-H pipe, Steeda swaybar Steeda Adj LCA, LCA Relo bracket H&R RS, D-spec, 4.10 adj panhard, Hurst ssk 60ft-1.9 - 1/8th-8.6 Post #: 1

RE: Cut outs - 5/11/2008 11:55:45 AM    brad281   Posts: 882 Joined: 3/15/2007 Status: offline Couldn't shoot flames when I ran just my o/r h and no axlebacks. (in reply to v8pilot) Post #: 2

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17888 nanaki 14679 88bluegt 14535 dan04cobra 14518 addermk2 13959 ride of the 13696 hotrods_n_bo 13304 2000gt4.6 12513 mustangman02 11949 1slo85 11713

New Vendors
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
4walls
BrandMotion