Replacing Water Pump Pulley (Full Version)

Mustang >> Ford Mustang Tech >> Classic Mustangs

Replacing Water Pump Pulley

  

rhrabal -> Replacing Water Pump Pulley (5/10/2008 12:17:07 PM)

Any basic ideas on replacing the water pump pulley.  Is it as easy as putting on a newer slimmer same diameter pulley.  I am trying to install an electric cooling fan and
I could use the few inches the stock pulley takes up (that sticks out towards the radiator).  Thanks. 

Richard

1967 Mustang FB
72 351C

  
baddog671 -> RE: Replacing Water Pump Pulley (5/10/2008 12:54:00 PM)

Richard, I just installed a new radiator, electric fan, and about to do the water pump pulley on my 67. I used a 14" from Advanced Auto as a pusher, and might be able to sneek a puller on the backside aswell. If you got one locally, go buy 1 or 2. Mine was 66$

Also, some companies make low profile fans, so that may be an option... Do they make slimmer pullies?

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.