silverstang1996

I raced my dad's 69 mach1 just earlier today, he has a modded 5.0 in the car with a 3speed manual with 3.50 rear gears. We raced from about 0-60 and i had about 1 1/2 cars on him, don't know if i would of pulled or he would have because it was a pretty short race. He spun off the line and i held that distance for most of the time, might of pulled a little, after a couple seconds he pulled in my lane behind me and we were done. I'd just like to have a real race with him to see how I'd do rather than such a short one, but it was pretty cool I guess. Now I'm off to my high school prom[:'(] waste of $150-$200 for four hours...bah.

__________________
96' GT, MAC catback and midpipe, aftermarket hood, 3:73's, shift kit in tranny, 4v cobra motor swap, C&L full intake, custom dyno tune, Steeda UDP

dynoed at 263rwhp/261rwtq after cobra swap (without C&L and UDP)

simpsonfan13

congrats
you taking the mach to prom?
if so make sure the back seats are properly protected

__________________

CobraSnake

why would he take the Mach to prom??? He just beat it in a race with his car. plus IMO I like the look of the newer mustangs over the older ones anyday(except for the eleanorGT500)

Mark

__________________

too much to list 412rwhp N/A 96 cobra

bt1288

Did your dad put the 302 in it. The 69 Mach came with a 351W as the base motor. If he had the 428 CJ you wouldn't have seen anything but taillights.

__________________
K/B 6 psi
330 rwhp
12.8@110

www.fquick.com/BT1288

FuzzyDiceRule

yeah, its either a clone, or whoever rebuilt it is retarded

they all came with either a 351w, a 351C, or a 428 cobra jet, all three would have wiped the floor with you

the 351 has ALOT more power potential than the 302

and if im not mistaken, all mach 1's were either 4 speeds or c4 autos

and cobrasnake, i hate to disagree with you (well not really, id love to disagree) because the classic mustangs run circles around the late models image wise

__________________

92 5.0 5 speed AFR 165 heads, Performer 5.0 Intake, Crane 2031
69 Mach 1, 351, TKO-600
71 chevelle, 454 BBC
454ci club- member #2

bt1288

You couldn't get a Cleveland until 1970.

__________________
K/B 6 psi
330 rwhp
12.8@110

www.fquick.com/BT1288

FuzzyDiceRule

ah yes, my mistake, but still, the point stands

__________________

92 5.0 5 speed AFR 165 heads, Performer 5.0 Intake, Crane 2031
69 Mach 1, 351, TKO-600
71 chevelle, 454 BBC
454ci club- member #2

Sarge_13

And even if it was the 351W, he still would have been beaten by everything other than a one arm, one legged poo-slingin monkey.

__________________

'04 Cobra - bye bye # 7 and # 8 cylinders.
'04 M3

08 Bullitt 2310

^^^^^^DAMN!That was rough!

__________________
If you don't kick the hornet's nest,You won't get stung!

simpsonfan13

wait so only redass would loose?

and cobra i ment take it to prom as a nice looking ride.
i know i didnt go to prom looking for a race
so in closing i agree with fuzzy
classic>new image wise

__________________