Always use the right tool (Full Version)

Mustang >> Other >> Off Topic

Always use the right tool


  

RyansQuick6 -> Always use the right tool (5/10/2008 8:01:50 AM)

Here's what that box full of tools is inteded for, now get it right;

Hammer: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate expensive car parts not far from the object we are trying to hit.

Mechanic's Knife: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on boxes containing convertible tops or tonneau covers.

Electric Hand Drill: Normally used for spinning steel Pop rivets in their holes until you die of old age, but it also works great for drilling rollbar mounting holes in the floor of a sports car just above the brake line that goes to the rear axle.

Hacksaw: One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.

Vise-Grips: Used to round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

Oxyacetelene Torch: Used almost entirely for lighting those stale garage cigarettes you keep hidden in the back of the Whitworth socket drawer (What wife would think to look in there?) because you can never remember to buy lighter fluid for the Zippo lighter you got from the PX at Fort Campbell

Zippo Lighter: See oxyacetelene torch.

Whitworth Sockets: Once used for working on older British cars and motorcycles, they are now used mainly for hiding six-month old Salems from the sort of person who would throw them away for no good reason.

Drill Press: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against the Rolling Stones poster over the bench grinder.

Wire Wheel: Cleans rust off old bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar callouses in about the time it takes you to say, "Django Reinhardt".

Hydraulic Floor Jack: Used for lowering a Mustang to the ground after you have installed a set of Ford Motorsports lowered road springs, trappng the jack handle firmly under the front air dam.

Eight-Foot Long Douglas Fir 2X4: Used for levering a car upward off a hydraulic jack.

Tweezers: A tool for removing wood splinters.

Phone: Tool for calling your neighbor Chris to see if he has another hydraulic floor jack.

Snap-On Gasket Scraper: Theoretically useful as a sandwich tool for spreading mayonnaise; used mainly for getting dog-doo off your boot.

E-Z Out Bolt and Stud Extractor: A tool that snaps off in bolt holes and is ten times harder than any known drill bit.

Timing Light: A stroboscopic instrument for illuminating grease buildup on crankshaft pulleys.

Two-Ton Hydraulic Engine Hoist: A handy tool for testing the tensile strength of ground straps and hydraulic clutch lines you may have forgotten to disconnect.

Craftsman 1/2 x 16-inch Screwdriver: A large motor mount prying tool that inexplicably has an accurately machined screwdriver tip on the end without the handle.

Battery Electrolyte Tester: A handy tool for transferring sulfuric acid from car battery to the inside of your toolbox after determining that your battery is dead as a doornail, just as you thought.

Aviation Metal Snips: See Hacksaw.

Trouble Light: The mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin", which is not otherwise found under cars at night. Health benefits aside, its main purpose is to consume 40-watt light bulbs at about the same rate that 105-mm howitzer shells might be used during, say, the first few hours of the Battle of the Bulge. More often dark than light, its name is somewhat misleading.

Phillips Screwdriver: Normally used to stab the lids of old-style paper-and-tin oil cans and splash oil on your shirt; can also be used, as the name implies, to round off Phillips screw heads.

Air Compressor: A machine that takes energy produced in a coal-burning power plant 200 miles away and transforms it into compressed air that travels by hose to a Chicago Pneumatic impact wrench that grips rusty suspension bolts last tightened 40 years ago by someone in Abingdon, Oxfordshire, and rounds them off.

Grease Gun: A messy tool for checking to see if your zerk fittings are still plugged with rust.


  

batmobile2005 -> RE: Always use the right tool (5/10/2008 8:17:48 AM)

quote:

ORIGINAL: RyansQuick6

Drill Press: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against the Rolling Stones poster over the bench grinder.

Wire Wheel: Cleans rust off old bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar callouses in about the time it takes you to say, "Django Reinhardt".



lmaooooo


dimebag -> RE: Always use the right tool (5/10/2008 8:23:40 AM)

hahah... thats a good one


mustang_pa -> RE: Always use the right tool (5/10/2008 9:08:11 AM)

Here's some of my own:

Drill Bits - Used to make holes in multi surfaces.  Also when you don't have the right bit, a smaller bit can be used if you rotate the drill in a circular motion to make the whole bigger while cutting wire and strapping the crap out of everything behind the surface.

Tool Box  - A storage facility to store all your tools, and it is in the inport/export business because the tool you need is in the cardboard box across the room that took 20mins of you life to find but atleast you know where pocket knife ended up. 

Wrenches - Used to put on and take off nuts and bolts if you could ever find the right one (see tool box) and the 1000 other wrenches that didn't work are all over your yard. 

Your Dog - Mainly used to get in your way at a very criticial moment of an install.

Machinics Gloves - A great invention to use so you don't bust nuckles and cut yourself.  You usually remember you have them after you smashed your hand on the intake while installing spark plugs. 

Magnet - Used to attach to a socket extender to remove spark plugs because the tool box exported the grommet that is suppose to be in the socket somewhere else in the garage. 

Nooks and Crannies of the Engine Bay - Often referred to as the black holes.  Mainly used to suck up nuts, bolts, wrenches, sockets, spark plugs, clamps, termial lugs, ciggarete lighter, thermostate,  ect.  Usually the last thing you need to complete the install.  I personally have a screwdriver stuck in between the headlight and the radiator support frame. 

WD-40 - Used to accidently spray on your rotors then take a drive.




  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.