c4 (Full Version)

Mustang >> Ford Mustang Tech >> Classic Mustangs

c4

  

anderson sc -> c4 (5/9/2008 8:36:41 PM)

need a c4 for a  67- v8, want to rebuild it my self. Was there any diferance if so what to look for? About how much should I spend for one that will need rebuild? Thank you!

  
rmodel65 -> RE: c4 (5/9/2008 8:41:16 PM)

a core maybe 50-100 $ the rebuild is pretty easy it doens trequire any expensive tools, i used a tci kit and bought a new stall converter to go with the last one i rebuilt

anderson sc -> RE: c4 (5/9/2008 8:44:26 PM)

I have rebuild trannys before but never had to find one, is there anything I should look for (type of bell housing) so on?

67coupe -> RE: c4 (5/9/2008 9:57:49 PM)

As long as it is a 6-bolt bellhousing you should be good. They did change the splines on the converter lmid 70's I think, but as long as you have the converter for the trans you buy you should be good. 

anderson sc -> RE: c4 (5/10/2008 7:53:44 PM)

THANK YOU FOR THE INFOR. WHEN WAS THE C4  STOPED BEING MADE. WOULD A NEWER TRANNY WORK? THE ONLY FORD TRANY I REBUILD WAS A A4LD. SO I DONT KNOW MUCH ABOUT FORD TRANS. KEEP IN MINE THIS CAR IS GOING TO MY WIFES DAILY DRIVER ,NO HOT ROD STUFF.

tyler72 -> RE: c4 (5/10/2008 9:02:20 PM)

65-69 is pan fill 24 spline. 70 and up is case fill 26 spline. Obviously, the more splines the stronger and more reliable it is, so look for a C4 with the dipstick in the case, not the pan. Also, the parts for these are cheaper as well.

true66gt -> RE: c4 (5/10/2008 9:22:05 PM)

STOP YELLING. NO NEED FOR CAPS.





[8D]   [:D]

rmodel65 -> RE: c4 (5/10/2008 9:26:55 PM)

BUT I LIKE ALL CAPS[8|]

true66gt -> RE: c4 (5/10/2008 9:50:14 PM)

ILIKETYPINGWITHNOSPACES.

anderson sc -> RE: c4 (5/11/2008 5:40:23 AM)

thank you very much!

rmodel65 -> RE: c4 (5/11/2008 5:48:56 AM)

he is just doing a little hazing[8D] idk but people on the net consider all caps yelling? i personally think its easier to read :P

LCC -> RE: c4 (5/11/2008 6:59:29 AM)

It's nice to see a little hummer, this site has been a bit dry for some time since, well you know...


rmodel, you remember those times...

65rangoon -> RE: c4 (5/11/2008 8:25:59 AM)

quote:

ORIGINAL: LCC

It's nice to see a little hummer, this site has been a bit dry for some time since, well you know...


rmodel, you remember those times...


yea i wish i was getting a little hummer while reading a little humor ... that would make my day !

:D

LCC -> RE: c4 (5/11/2008 9:11:30 AM)

I can't believe I missed that[:)][:)][:)].....Fruedian slip.....

rmodel65 -> RE: c4 (5/11/2008 9:34:27 AM)

lol i remember everything :P ive slacked off in a  lot of tech post staying more in the ot 

baddog671 -> RE: c4 (5/11/2008 9:43:18 AM)

I picked up a 74 c4 with a brand new converter, running condition, for 200$ the other day. Great score! Really clean and the fluid is new looking...

rmodel65 -> RE: c4 (5/11/2008 10:03:42 AM)

my brother has a brand new c4 at my moms house and his 69 cougar if he leaves it here any longer i might take up the project and buy it from him. i really wish he would take it somewhere lol

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.