86 Mustang GT -> Best cam for my setup (5/9/2008 11:12:35 AM)
I have an 86 GT and i Need your opinion on the cam that would and work best with my setup would like it to sound lopey but thats the least of my worries.
TW heads cold air intake bbk ssi upper and lower intake 3:73 gears
mjr46 -> RE: Best cam for my setup (5/9/2008 11:28:30 AM)
quote:
ORIGINAL: 86 Mustang GT
I have an 86 GT and i Need your opinion on the cam that would and work best with my setup would like it to sound lopey but thats the least of my worries.
TW heads cold air intake bbk ssi upper and lower intake 3:73 gears
IF IT'S still SD than being not being lopey will be your concern cause SD calculates load base off a map/sensor which uses vaccum to determine such and changing cam will greatly affect fuel calc/ a/f .......but if it's mass air converted you'll be fine[;)]
86 Mustang GT -> RE: Best cam for my setup (5/9/2008 11:37:19 AM)
my car is mass air must have forgot to list it Do you have any sugestions on wich cam would work Also would i need to notch the flattops even though im running the tw heads
mjr46 -> RE: Best cam for my setup (5/9/2008 11:41:14 AM)
lift will not factor into ptv...but the best way to maximize your potential in all areas of the cams performance in your case would be call a custom grinder...you'll spend 20 -30 more for such but the benifit will more rthan outweight the cost[;)]
PJC Racing -> RE: Best cam for my setup (5/10/2008 12:01:15 AM)
The best cam for any setup is a custom cam.
5spd GT -> RE: Best cam for my setup (5/10/2008 8:12:34 PM)
quote:
ORIGINAL: PJC Racing
The best cam for any setup is a custom cam.
Yep, and may I add, by the right person as well.
mjr46 -> RE: Best cam for my setup (5/10/2008 9:18:53 PM)
a well choosen OTS cam can do a good job as well[:D]
Jasperstang308 -> RE: Best cam for my setup (5/10/2008 10:20:48 PM)
quote:
ORIGINAL: mjr46
a well choosen OTS cam can do a good job as well[:D]
but then comes the question which cam applies to that set up?? i personally couldnt give that answer
mjr46 -> RE: Best cam for my setup (5/10/2008 10:26:14 PM)
quote:
ORIGINAL: Jasperstang308
quote:
ORIGINAL: mjr46
a well choosen OTS cam can do a good job as well[:D]
but then comes the question which cam applies to that set up?? i personally couldnt give that answer
I understand what you mean..and I was only making a general statement as I refuse to reccommend anyone grind of cam to anyone cause everyone has an opinion on such and I wish not to have my rear end scourched for recommending the single most important choice = the brain of a motor...as for my OTS cam in my ride ..it performs extremely well..which will be my little secret[:D].....ocassionally I'll recommend a cam or two but I won't force the issue[;)]
Jasperstang308 -> RE: Best cam for my setup (5/10/2008 10:30:28 PM)
quote:
ORIGINAL: mjr46
quote:
ORIGINAL: Jasperstang308
quote:
ORIGINAL: mjr46
a well choosen OTS cam can do a good job as well[:D]
but then comes the question which cam applies to that set up?? i personally couldnt give that answer
I understand what you mean..and I was only making a general statement as I refuse to reccommend anyone grind of cam to anyone cause everyone has an opinion on such and I wish not to have my rear end scourched for recommending the single most important choice = the brain of a motor...as for my OTS cam in my ride ..it performs extremely well..which will be my little secret[:D].....ocassionally I'll recommend a cam or two but I won't force the issue[;)]
