Anyone know whats the most whp someone has gotten out of the novi 2200 kit. Me and Jen(grabber cs) might be building our motors here in a few months. Ive looked for smaller pulleys and cant seem to find them. Ive only found different crank pulleys to up the boost 2-3 psi. Does 550-600whp seem reasonable??

I know Adam at St Motorsports was doing a paxton build on one of his mustangs and he was talkin like 600 rwhp I think. Give them a call...

I've seen 500+ rwhp with Paxton superchargers. I just checked the Paxton website and the Novi 2200 can support up to 1000hp so it sounds as if the supercharger itself can support it.

Paxton sells alot of smaller pullies, just call them. The overdrive pulley is also a good idea to prevent belt slip.

Italked with seth at brenspeed and he said there has been some that put over 600whp with the paxton kit. So hopefully i can get mine up to that hp level[&:]

Big three sells a mustang that has 630rwhp at the wheels. They are running 16-18psi on their Paxton.I would assume the only thing holding you back will be possible belt slip. I would go with the overdrive crank pulley for 2-3psi then change your blower pulley as needed. Paxton does sell an 8 rib belt setup that you can buy if belt slipage becomes an issue. You should be able to push alot of boost with the right belt/pulley setup. Most of the Renegade drag racers run either the Novi 2000 or the Vortech Ysi with 18-25psi of boost, they do run 8 rib setups.