NEED TO KNOW HOW MUCH HP

Printable Version

Mustang Forums >> Ford Mustang Tech >> 5.0 Mustang >> Speed Density/Carb/SSP section >> NEED TO KNOW HOW MUCH HP

Page: [1]

Login Message << Older Topic   Newer Topic >>

NEED TO KNOW HOW MUCH HP - 5/8/2008 2:12:30 PM    CALI 82 CHP   Posts: 5 Joined: 5/5/2008 Status: offline HEY EVERYONE IM A NEW MEMBER... I GOT AN 82 SSP MUSTANG WITH MOTOR OF A 302 OF A 90 GT, EDELBROCK PERFORMER RPM MANIFOLD EDELBROCK 600CFM CARB,PULLIES, BBK 1 5/8 LONGTUBES, X PIPE,SOME FLOWMASTERS,HURST SHORT SHIFTER,RAM Power Grip Kevlar Clutch and stock 7.5 rear end... sorry for the long list but i would like to know wut u guys think my hp is??? Attachment (1) _____________________________ 90 302 motor, EDELBROK PERFORMER RPM MANIFOLD, EDLEBROK 600 CFM CARB, PULIES, 3G ALTERNATOR, AC/SMOG ELIMINATOR, BBK 1 5/8 LONGTUBES, 3 INCH X PIPE, FLOWMASTERS, RAM POWER GRIP KEVLAR CLUTCH, 7.5 REAR END 3.07 GEARS Post #: 1

RE: NEED TO KNOW HOW MUCH HP - 5/12/2008 6:41:26 AM    Gary H Posts: 709 Joined: 3/31/2007 From: Chandler, Az Status: offline Probably about 215-220 at the wheels. _____________________________ 84 Gt vert, 13.58 @ 102.84 Az summer heat http://www.mysticspeed.com/asstpics/pics482.jpg 68 Mustang coupe 8 sec street car project http://www.mysticspeed.com/68chassis/images/34-68nwrear.jpg My site. http://www.mysticspeed.com (in reply to CALI 82 CHP) Post #: 2

RE: NEED TO KNOW HOW MUCH HP - 5/12/2008 8:04:14 PM    Burke3531   Posts: 2 Joined: 5/12/2008 Status: offline I think you may have a little more than 215-220hp. You're car sounds pretty similar to mine less the N20 and rear with gears. My motor did 215rwhp back when it was fuel injected and it seems to run alot harder now with the carb/RPM intake. I'd estimate 230ish rwhp _____________________________ 84 GT350 - 88 roller motor, WC T5, O/R H, 8.8 w/3.73 and N20 - 13.9 @100 on motor w/street tires 99 Z28 A4 - stock - 13.7@102 (in reply to Gary H) Post #: 3

RE: NEED TO KNOW HOW MUCH HP - 5/15/2008 10:27:38 PM    rebel_yell Posts: 144 Joined: 8/7/2007 From: Issaquah, WA Status: offline those had 7.5" rear ends??? _____________________________ 88 LX 5.0- MSD cap,rotor,wires,and blaster coil, BBK shorty 1 5/8" headers, o/r h-pipe, K&N air filter, MAC 70MM TB P&P''''d, 3.73''''s, 14.532@95 mph (stock) hoping for 13s this summer! (in reply to Burke3531) Post #: 4

RE: NEED TO KNOW HOW MUCH HP - 5/16/2008 5:25:55 PM    Stimmel   Posts: 38 Joined: 11/14/2007 Status: offline SSP cars did NOT have 7.5 rear ends They all had 8.8's (in reply to rebel_yell) Post #: 5

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17932 nanaki 14694 dan04cobra 14536 88bluegt 14536 addermk2 14023 ride of the 13720 hotrods_n_bo 13332 2000gt4.6 12516 mustangman02 11995 1slo85 11791

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion