65 6cyl Coupe Disc Conversion (Full Version)

Mustang Forums >> Ford Mustang Tech >> Classic Mustangs

65 6cyl Coupe Disc Conversion

  

J1965K -> 65 6cyl Coupe Disc Conversion (5/7/2008 5:09:57 PM)

I'm sure tons of people have asked most of these questions I have so just bare with me. I have a '65 Coupe straight 6. I am going to be putting disc brakes on the front and I don't want to use single piston calipers like all of the 6 cyl. conversion kits have. I can't find a kit I want so I'm going to have to piece one together. Now for the questions:

1. I want to put V8 5lug spindles on the car, what else to I need to change? I've been told the tie rods, but I've also been told all of the linkage?

2. Anyone know a good place to buy V8 spindles?

3. Anyone have a list, or a good idea of all the parts I will need if I am going to piece together my own kit?


Another question, off topic, but where do the neutral switch and the reverse switch on my C4 plug into?

Any help would be greatly apprecaited.

  
andrewmp6 -> RE: 65 6cyl Coupe Disc Conversion (5/7/2008 5:19:09 PM)

Most use the granada spindles but they give you single piston calipers too.Stock v8 mustang spindles you have to get used from http://www.mustangjunkyard.com/ http://www.perogie.com/ http://www.ilovemymustang.com/ ebay.com and many other places.
With the v8 spindles the oem brakes are 4 piston or you can go after market baer wilwood etc id use http://www.mustangsteve.com/cobrabrakes.html its a cheap way to get baer brakes baer is pbr same thing the cobra uses and cobra rotors and pads are cheaper.Heres something to read http://www.mustangsteve.com/tierodbushings.html

ThanksDad -> RE: 65 6cyl Coupe Disc Conversion (5/7/2008 6:49:58 PM)

You don't say where you are but CJ's Pony Parts in Pa has a salvage yard and the All Ford Nationals are in Carlisle PA next month.

J1965K -> RE: 65 6cyl Coupe Disc Conversion (5/8/2008 12:19:40 AM)

Yeah I live in AZ right now, I'm just gona buy some V8 spindles and use those bushings that Mustang Steve offers, that looks like the cheapest and hastle free option. Thank you for the advice, and I'm sure I'll have some more questions soon.

rmodel65 -> RE: 65 6cyl Coupe Disc Conversion (5/8/2008 12:43:38 AM)

while your at it buy his 13 inch brake brackets and buy some new caliper and rotor from ford and go big[:D]

J1965K -> RE: 65 6cyl Coupe Disc Conversion (5/8/2008 11:59:57 PM)

Is it worth it? I was just going to go with the CSRP swap seems like it will be enough. besides then I would need to piece together a kit. . . which since I'm buying spindles would include hubs and would probly be pretty expensive.    

  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.