Posts: 449
Joined: 10/21/2005 From: Central Islip, NY Status: offline
I just installed my 65mm TB. What a pain in the ars that was. Direct bolt?...yea sure. but anyways i got it on and everything is very secure and snug. When I start the car on a cold start the rpm's drop to around 300. Once it sits i give it a quick rev and it ll idle fine. Then once its idling fine I can hearlike this air leak. I guess its coming from the IAC(piece right behind my intake manifold). It just leaks a little bit of air. Do I have to adjust anything after the TB was installed.
BTW...car is a `99 Cobra.
_____________________________
1999 Slo-Bra:
Aluminum double decker wing, 20" spinners, HKS 4.5" mufflers, underbody neones, lambo doors, body kit, and a b19 VTAK motor
Printable Version
New throttle body Install problems....HELP!! - 
