New LCA's installed (Full Version)

Mustang Forums >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific >> Handling Performance

New LCA's installed

  

elroyjetson_1978 -> New LCA's installed (5/6/2008 2:00:48 PM)

I finally got my J&M LCAs installed. They were a major pain to install and get torqued but I must say DAYMN those things feel great. It seems like the car just begs to go hard when I punch it and they still ride smooth just crusing around. Now to dragrace to see how they help or hinder straight line performance

  
Fred Malibu -> RE: New LCA's installed (5/6/2008 3:14:11 PM)

pics?

elroyjetson_1978 -> RE: New LCA's installed (5/6/2008 5:29:37 PM)

It'll take a few days I'm not sure where the digital cam is [:@]

CroDalmatinac -> RE: New LCA's installed (5/6/2008 5:43:18 PM)

They worth $108.64? haha. I was thinking of these or BMR but if these are good quality, I might as well go for the cheaper brand.

JimC -> RE: New LCA's installed (5/6/2008 7:09:29 PM)

I have them and they have been on since last fall - no noise and the car still feels good and tight.  And after putting them on I drove straight to the track, no wheel hop and shorter 60' times right away.  You will like them I'm sure.  It is a lot easier to install them if you have access to a lift, but a little difficult to "pre load" them when torquing them when you use the lift.


I have a couple of pictures of them when I put mine in:
[img]http://i154.photobucket.com/albums/s256/jimandpat/IMG_0732.jpg[/img]
[img]http://i154.photobucket.com/albums/s256/jimandpat/IMG_0734.jpg[/img]

And this is a couple of weeks back when I painted my calipers - you can see they held up well through a very tough winter and about 15,000 miles:
[img]http://i154.photobucket.com/albums/s256/jimandpat/V6%20to%20GT%20front%20brakes/IMG_1408.jpg[/img]

Fred Malibu -> RE: New LCA's installed (5/7/2008 4:17:40 AM)

None of you had to do relocation brackets because you are all on stock springs right?

I can't just pop LCA's on because I got Sportlines..

How hard is it to put on the relo brackets?

Thanks.

FM



  

Page: [1]

Return to Mustang Forums home page or view the Full Version of this page.