|
View Full Version : dont want to get rid of strut bar, options for intake 758cobra 05-06-2008, 10:44 AM i dont want to remove my strut bar but want to get a new intake. What are your suggestions to ones that dont require the strut bar to be removed or if you have your strut bar removed is there a big difference with the drive Dilireus 05-06-2008, 12:03 PM Someone correct me if I'm wrong, but there are no other intakes for the B-head 96-98s other than the Lincoln Mk VIII, which you definitely don't want unless you want to lose a lot of top end power. Removing the strut tower brace won't make any noticeable difference in handling regardless. The 98s didn't even come with one. Dilireus 05-06-2008, 12:25 PM ...unless you define a Kenne Bell blower as an intake, that is! My_1st_Stang 05-06-2008, 02:05 PM BBK is the only one I could find that will work with the STB. I put one on my wife's 97Cobra and it worked out great. Dilireus 05-06-2008, 02:34 PM ORIGINAL: My_1st_Stang BBK is the only one I could find that will work with the STB. I put one on my wife's 97Cobra and it worked out great. I don't see a 96-98 4V intake on BBK's site. Only 2V. Do you have a link? My_1st_Stang 05-06-2008, 02:50 PM Jegs.com is where I got mine from... My_1st_Stang 05-06-2008, 02:57 PM Here's another link to one I found... http://www.texashotrods.com/StoreFrontProfiles/DeluxeSFItemDetail.aspx?sid=1&sfid=70952&c=49715&i =22405196 My_1st_Stang 05-06-2008, 02:59 PM And another.... http://marylandspeed.com/bbk-fenderwell-cold-air-intake-chrome-19961998-mustang-cobra-46l-4v-bbk-1713-p-1335.html Dilireus 05-06-2008, 03:34 PM Oooh...you're talking about a cold air inlet. I thought he was asking about an intake manifold since he said he wanted a new intake. 758Cobra...what are you looking for? My_1st_Stang 05-06-2008, 03:37 PM I agree with you there...No aftermarket mainifold that I know of... jlg32281 05-06-2008, 04:01 PM If you have to ditch it, it's not a big deal anyway. Atleast this is what I tell myself since mine didn't come with one. If you do go with an intake that won't allow you to use the brace, I'll take it. lol. Dilireus 05-06-2008, 07:05 PM ORIGINAL: jlg32281 If you have to ditch it, it's not a big deal anyway. Atleast this is what I tell myself since mine didn't come with one. If you do go with an intake that won't allow you to use the brace, I'll take it. lol. I pulled mine off years ago (don't even remember why now). I have never been able to tell any difference in handling, but then again I've never done any autocrossing or road racing. 758cobra 05-06-2008, 09:13 PM looking for intake not manifold and thanks guys jlg32281 05-07-2008, 09:01 AM I say take it off and give it to me! :D 758cobra 05-08-2008, 10:34 AM i bought the bbk so i can keep the strut bar |
|