Is there anything I need to have before...

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

Is there anything I need to have before...

Printable Version

Mustang Forum >> Ford Mustang Tech >> 6 Cyl (V6) Applications >> Is there anything I need to have before...

Page: [1]

Message

<< Older Topic Newer Topic >>

Is there anything I need to have before... - 5/6/2008 6:19:32 AM

akp20032004

Posts: 192
Joined: 2/27/2008
From: Munger, MI
Status: offline

I put 3.73 gears on my car? What kind of gears should I get?

Post #: 1

RE: Is there anything I need to have before... - 5/6/2008 8:31:03 AM

jthorn9

Posts: 11578
Joined: 9/19/2005
From: Pearl River, Louisiana
Status: offline

Bearing/shim kit
Tuner (99-04)
Proper speedo gear tooth (94-98) www.mustangsunlimited sells the entire selection, you need a different speedo gear depening on the rear gear ratio.

OPT: Limited Slip Differential

_____________________________

Stock 00 Mustang V6
95 Mustang GT
277 rwhp 360lbs rwtq
My Car Domain Page
My Mustang Site Page

(in reply to akp20032004)

Post #: 2

RE: Is there anything I need to have before... - 5/6/2008 9:43:10 AM

akp20032004

Posts: 192
Joined: 2/27/2008
From: Munger, MI
Status: offline

Everything is stock on this car so I need to know everything. This is all I want for right now just to pick it up a bit.
http://mustangsunlimited.com/itemdy01.asp?T1=M4209F373+01&Category=Drivetrain&subCategory=&CatKey=74-01
After I get this, is the stuff listed on the bottom everything else I need to put this in?

(in reply to jthorn9)

Post #: 3

RE: Is there anything I need to have before... - 5/6/2008 12:04:43 PM

SilvrStang

Posts: 3942
Joined: 4/23/2006
From: Las Vegas
Status: offline

Just what jthorn said and with this I would recommend a b&m tranny cooler just in case ;)

_____________________________

Mods: JLT Intake,Diablo Predator,UPR 70MM TB/Plenum,Nitto Drag Radias, Eibach Pro Kit, Roush LCAs,MAC O/R H Pipe/Magnapacks

(in reply to akp20032004)

Post #: 4

RE: Is there anything I need to have before... - 5/7/2008 2:07:07 PM

DreamBMC

Posts: 35
Joined: 4/23/2008
Status: offline

I want to do the gears too.
I have a stock 2002 Mustang V6

Up there you mentioned the link of the gears on that website.
But are those just the gears you buy?

Can you give me a link to each of the things I need to get gears?

(in reply to SilvrStang)

Post #: 5

RE: Is there anything I need to have before... - 5/7/2008 3:14:55 PM

mysteed

Posts: 242
Joined: 1/22/2006
Status: offline

quote:

ORIGINAL: DreamBMC

I want to do the gears too.
I have a stock 2002 Mustang V6

Up there you mentioned the link of the gears on that website.
But are those just the gears you buy?

Can you give me a link to each of the things I need to get gears?

If you look on the Mustangs Unlimited website that was posted above, they list on that page exactly what parts you need to do gears.

_____________________________

-Nathan
Mysteed Preformance
Home of the 1996-2004 V6 M112 supercharger kit

Sponsored by: Super Six Motorsports, VMP Tuning, and Autobadges.com

(in reply to DreamBMC)

Post #: 6

RE: Is there anything I need to have before... - 5/7/2008 3:31:57 PM

DreamBMC

Posts: 35
Joined: 4/23/2008
Status: offline

Does it come with all those things that are mentioned below the picture in that link?

I see that it needs those things in order for them to be installed
but how do i get those?

(in reply to mysteed)

Post #: 7