I put 3.73 gears on my car? What kind of gears should I get?

Bearing/shim kit
Tuner (99-04)
Proper speedo gear tooth (94-98) www.mustangsunlimited sells the entire selection, you need a different speedo gear depening on the rear gear ratio.

OPT: Limited Slip Differential

Everything is stock on this car so I need to know everything. This is all I want for right now just to pick it up a bit.
http://mustangsunlimited.com/itemdy01.asp?T1=M4209F373+01&Category=Drivetrain&s ubCategory=&CatKey=74-01
After I get this, is the stuff listed on the bottom everything else I need to put this in?

Just what jthorn said and with this I would recommend a b&m tranny cooler just in case ;)

I want to do the gears too.
I have a stock 2002 Mustang V6

Up there you mentioned the link of the gears on that website.
But are those just the gears you buy?

Can you give me a link to each of the things I need to get gears?

ORIGINAL: DreamBMC

I want to do the gears too.
I have a stock 2002 Mustang V6

Up there you mentioned the link of the gears on that website.
But are those just the gears you buy?

Can you give me a link to each of the things I need to get gears?
If you look on the Mustangs Unlimited website that was posted above, they list on that page exactly what parts you need to do gears.

Does it come with all those things that are mentioned below the picture in that link?

I see that it needs those things in order for them to be installed
but how do i get those?