ezekiel90

okay so i have a choice, ive got about 400$ or so and beacuase i got a good SAT score, my dad is willing to pitch in around 350-300$ for a new car mod. Now i can either combine my money and my dads and get these rims http://www.americanmuscle.com/chfrwh1.html or i can get powdercoated BBK headers, and he would pay for them. Any other time i would go for the rims but the problem is i got this crack on my right manifold and i need to fix that, which getting the new headers would do just that. Now i need some advise on this decision. if i get the rims then i wouldnt be able to run my car very hard due to the crack :/. but if i get the headers, i would miss out on the sweet look of the rims. DECISIONS DECISIONS!

__________________

VCS_SSSTANG

Could I suggest the black fr500s with your silver car !

__________________
~ Kyle ~
Twin For The Win, Now I need a new sig

tuned: joe @ www.tricktuners.com

mooses

How large is the crack? Passenger side manifold cracks are so common on our cars it isn't funny. Personally, I would never get shorties since they offer no power increase or difference in sound, so I would go with the wheels.

rob3980

Yes do the Fr500's

__________________
S3 OneWheels 20x8.5 front and 20x10 rear / Eibach Springs / Alpine Iva-w205 / Window Tint / Mac Lt Headers/ Mac H Pipe/ Mac Mass Air System/ Magnaflow Catback/ SCT Livewire/ Cobra R Front/ Saleen Sides and Rear/ Black Widow Hood/ Steeda Tri-ax/

mws96

I'd do the wheels too. You won't miss your stockers.

Besides, depending on the size of the crack you can get it welded shut to hold you over until you get the cash to get some Pacesetter or MAC LT's.

NeoTokyo

I got a set of perfect 00' Manifolds I will let for got $75, pm me if interested. I can have a shop here magnaflux them too if you are worried, just add that to the cost. I think they charge 10 or 15 for the one site.

I would got with Steeda Ultralite rims (17's are lightest)and UDP's. You will gain fuel economy and eventually pay for them and you will be a bit quicker too.

If you go with the FR500's then I suggest black.

-Eric-

__________________
95' Mustang Mach 1 281 manual - Penny -
Slightly Modded 4.6L / 5.3L ModStroker
RAM King Cobra Super Duty Clutch
White Ext. Charcoal Mach 1 Int.
Mach1 Shaker, badging/Clone
18"x10.5" Y2K Cobra R's

96' Mustang 00' Swap - NoName -

cguarino10

RIMS

__________________
[IMG]<a href="http://s288.photobucket.com/albums/ll193/cguarino10/?action=view¤t=1.jpg" target="_blank"><img src="http://i288.photobucket.com/albums/ll193/cguarino10/1.jpg" border="0" alt="The stang"></a>

Redneck1465

Personally if your dad is gonna pay for the headers I would do that and save your money and get the rims a little later. But thats just my opinion. You wouldnt have to save much more for the rims.

__________________
William Tatge

crash

RIMS!!!! You'll like the look better and you probably wont notice the differencewith the headersunless you get a full exhaust set up.

__________________
[img]

mysteed

I say do both. Get a cheap set of stock replacement manifolds and black DD FR500's.

Not so much. Also, Steedas are lighter but not that much lighter. If you want rims that weigh less look into CCW and other lightweight racing wheels.

__________________
-Nathan
Mysteed Preformance
Home of the 1996-2004 V6 M112 supercharger kit

Sponsored by: Super Six Motorsports, VMP Tuning, and Autobadges.com